Topleem Clay paint

Solvent-free, permanently elastic wall and ceiling paint with a fine texture for indoor use, washable according to EN 13 300.

Clay paint is breathable and moisture-regulating, contributing to a healthy indoor climate. It has antistatic properties, provides good coverage, and can be applied with minimal dripping and splashing. With a very high solid content, the paint offers excellent filling and covering capabilities.

Areas of application:
For covering and filling coats on dry, absorbent, grease-free surfaces such as wallpaper, plaster, and typical mineral surfaces, as well as on solid old coatings and wood.

Drying time:
Repaintable after 6 – 12 hours depending on room temperature and humidity. Final drying occurs after approximately 10 days.

Coverage:
Approximately 0.10 - 0.17 liters per m²; about 6 - 8 m² per liter.

Application instructions:

Preparation:
Thoroughly remove water-soluble old paints such as glue or lime paints. Non-adhering paint residues should be brushed off. Very smooth and less absorbent surfaces should be mechanically roughened. Highly absorbent and powdery surfaces must be pre-treated.

Application:
The paint should be applied evenly and thinly with a roller or brush. It should be spread uniformly in all directions. On light surfaces, one coat is usually sufficient. For highly absorbent surfaces (clay plaster, sand-lime brick, etc.), we recommend a preliminary coat with diluted paint (max. 10% water). After drying, the final coat should be applied undiluted. Each layer of paint must be dry before applying the next one! Note: Clay paint is a natural product and may exhibit slight color variations from batch to batch. Therefore, care should be taken to ensure batch consistency during application. Buckets from different batches should be mixed if necessary.