Topleem Clay paint

Solvent-free, permanently elastic wall and ceiling paint with a fine texture for indoor use, washable according to EN 13 300.

Clay paint is breathable and moisture-regulating, contributing to a healthy indoor climate. It has antistatic properties, provides good coverage, and can be applied with minimal dripping and splattering. With a very high solid content, the paint offers excellent filling and covering capabilities.

Areas of application:
For opaque and filling coatings on dry, absorbent, grease-free surfaces such as wallpapers, plaster, and common mineral surfaces, as well as on solid old coatings and wood.

Drying time:
Repaintable after 6 to 12 hours, depending on room temperature and humidity. Final drying occurs after about 10 days.

Coverage:
Approximately 0.10 to 0.17 liters per m²; about 6 to 8 m² per liter.

Application instructions:

Preparation:
Thoroughly remove water-soluble old coatings such as glue or lime paints. Non-adhering paint residues must be brushed off. Very smooth and less absorbent surfaces should be mechanically roughened. Highly absorbent and powdering surfaces must be pre-treated.

Application:
The paint is applied evenly and thinly with a roller or brush. It should be spread uniformly in all directions. On light surfaces, usually one coat is sufficient. On highly absorbent surfaces (clay plaster, lime sandstone, etc.), we recommend a preliminary coat with diluted paint (max. 10% water). After drying, the final coat should be applied undiluted. Each layer of paint must be dry before applying another coat! Note: Clay paint is a natural product that may show slight color variations from batch to batch. Therefore, consistency between batches should be ensured during application. Buckets from different batches should be mixed if necessary.