Topleem Clay paint

Solvent-free, permanently elastic wall and ceiling paint with a fine texture for indoor use, washable according to EN 13 300.

Clay paint is breathable and moisture-regulating, contributing to a healthy indoor climate. It is antistatic, provides good coverage when wet, and can be applied with minimal dripping and splattering. With a very high solid content, the paint has excellent filling and covering properties.

Areas of application:
For opaque and filling coatings on dry, absorbent, grease-free surfaces such as wallpapers, plaster, and typical mineral surfaces, as well as on solid old coatings and wood.

Drying time:
Repaintable after 6 to 12 hours depending on room temperature and humidity. Complete drying takes about 10 days.

Coverage:
Approximately 0.10 to 0.17 liters per m²; about 6 to 8 m² per liter.

Application instructions:

Preparation:
Thoroughly remove water-soluble old coatings such as glue or lime paints. Non-adhering paint residues should be brushed off. Very smooth and less absorbent surfaces should be mechanically roughened. Highly absorbent and powdering surfaces must be pre-treated.

Application:
The paint is applied evenly and firmly with a roller or brush. It should be spread evenly in all directions. On light surfaces, usually one coat is sufficient. For highly absorbent surfaces (clay plaster, lime sandstone, etc.), we recommend a preliminary coat with diluted paint (max. 10% water). After drying, the final coat should be applied undiluted. Each layer of paint must be dry before applying the next one! Note: Clay paint is a natural product that may exhibit slight color variations from batch to batch. Therefore, care should be taken to ensure batch consistency during application. Buckets from different batches should be mixed if necessary.