DeWalt Metal drill HSSG EXTREME 2

Abrasion-proof size markings, placed outside the clamping area, for permanently good legibility (from Ø 5.0 mm)
AntiSlipShaft with 3 milled clamping surfaces prevents the drill from spinning in the chuck (from Ø 5.0 mm)
Circular holes with clean, almost burr-free hole edges
EXTREME DEWALT2Centre point enables pinpoint drilling without running off, specially ground shoulder cutting edges mill exact, circular holes with clean edges (from Ø 4.8 mm)
Anti-slip shank with 3 milled clamping surfaces prevents the drill from spinning in the chuck (from Ø 5.0 mm)
EXTREME DEWALT 2 The specialist for freehand drilling in thin-walled materials
Start immediately after setting no more centre punching necessary
Circular holes with clean, almost burr-free hole edges
Iron oxide alloy effectively protects against overheating
Up to 50 % increased fracture stability
Up to 50 % increased fracture stability
Constantly increasing core diameter in the direction of the shank for highest breakage stability in freehand use (from Ø 4.8 mm)
EXTREME 2" centre point enables precise spot drilling without running off, specially ground shoulder cutting edges mill exact, circular holes with clean edges (from Ø 4.8 mm)
Start immediately when setting no more centre punching necessary
EXTREME 2 The specialist for freehand drilling in thin-walled materials:
Iron oxide alloy effectively protects against overheating
Constantly increasing core diameter in the direction of the shank for highest breakage stability in freehand use (from Ø 4.8 mm)
Abrasion-resistant size markings, placed outside the clamping area, for permanently good legibility (from Ø 5.0 mm)

Application examples:
For drilling sheet metal and thin-walled profiled materials (as well as tubes without pre-graining) where exact and clean holes are required.Also very suitable for drilling wood and plastics.
For use in alloyed and unalloyed steels up to 900 N/mm² tensile strength.