Best selling Model paints from Humbrol
This page always stays fresh and updates automatically.
1. Humbrol Enamel thinner
Enamel thinner - 125ml bottle
Use
Thinner for solvent-based enamel paints, most commonly used for airbrushing.
Application
As for the colour used.
Drying time
The drying times of the colour may change due to the addition of enamel thinners.
2. Humbrol Acrylic No 49 Varnish Matt
The Humbrol Acrylic Hobby Varnish Spray in the variant No 49 Varnish Matt is a high-quality modeling paint specifically designed for hobbyists and model builders. With a content of 150 milliliters, this matte varnish provides an even and opaque coating, making it ideal for various modeling projects. The acrylic paint is characterized by its ease of use and quick drying time, making it a practical choice for creative applications. The varnish gives a matte finish that adds a realistic touch to models while also protecting them from environmental influences. Made in the United Kingdom, this product meets high-quality standards and is an essential tool for any model builder.
- Quick drying time for efficient work
- Matte finish for a realistic appearance
- Designed for easy application on various surfaces
- Made in the United Kingdom with high-quality standards.
3. Humbrol No 33 Black Matt
Usage
A solvent-based, fast-drying paint designed for use on plastic model kits, but can also be used on other surfaces. Matte, satin, gloss, metallic, metalcoat, and clear finishes are available (the finish varies depending on the color).
Surface
A wide range of surfaces, including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard, and more (always test suitability on a small area first).
Coverage
A 14ml can covers approximately 0.3m², depending on the application thickness.
Application
Apply directly from the can with a brush. For airbrushing, use a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that metalcoat paints are designed to be polished after fully drying.
Drying Time
Gloss: 1-2 hours
Matte & Satin: 20-40 minutes to dust dry, up to 24 hours for fully dry
Metallic: hard dry after approximately 10 days. Drying times vary depending on ambient temperature and humidity. Recoating: at least 6 hours (preferably overnight).
Cleaning Instructions:
Brush: Use Humbrol Enamel Thinners
Airbrush: rinse thoroughly with Humbrol Enamel Thinners. The product is permanent once dry.
4. Humbrol N0 57 Pastel Pink Matt
Application
A solvent-based, quick-drying paint designed for use on plastic model kits, but can also be used on other surfaces. Matt, satin, gloss, metallic, metalcote and clear finishes are available (finish varies by colour).
Substrate
A variety of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always test on a small test area first for suitability).
Coverage
One 14 ml can covers approximately 0.3 m², depending on the application thickness.
Application
Apply directly from the can with a brush. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual dilution ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are intended for polishing when completely dry.
Drying time
Gloss: 1-2 hours
Matt & Satin: 20-40 minutes dust dry, up to 24 hours for hard dry
Metallics: hard dry in about 10 days. Drying times vary depending on ambient temperature and humidity. Recoating: at least 6 hours (preferably overnight).
Cleaning instructions:
Brushes: use Humbrol Enamel Thinners
Airbrush: rinse thoroughly with Humbrol Enamel Thinners. The product is permanent after drying.
5. Humbrol No 78 Cockpit Green Matt
Usage
A solvent-based, fast-drying paint designed for use on plastic model kits, but can also be used on other surfaces. Matte, satin, gloss, metallic, metal coat, and clear finishes are available (the gloss varies depending on the color).
Surface
A variety of surfaces, including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard, and more (always test on a small area first for suitability).
Coverage
A 14ml can covers approximately 0.3m², depending on the thickness of the coat.
Application
Apply directly from the can with a brush. For airbrushing, use a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that metal coat paints are intended to be polished once fully dry.
Drying Time
Gloss: 1-2 hours
Matte & Satin: 20-40 minutes to dust dry, up to 24 hours for hard dry
Metallics: hard dry in about 10 days. Drying times vary depending on ambient temperature and humidity. Recoating: at least 6 hours (preferably overnight).
Cleaning Instructions:
Brush: Use Humbrol Enamel Thinners
Airbrush: thoroughly rinse with Humbrol Enamel Thinners. The product is permanent once dry.
6. Humbrol No 147 Light Grey Matt
A solvent-based, quick-drying paint developed for use on plastic model kits, but can also be used on other surfaces. Matt, satin, gloss, metallic, metalcote and clear finishes are available (finish varies by colour). A variety of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always test on a small test area first for suitability). One 14ml can covers approximately 0.3m², depending on the layer thickness. Apply directly from the can with a brush. Use with a suitable thinner such as Humbrol Enamel Thinners in the airbrush. Two thin coats are preferable to one thick coat. The usual dilution ratio is 2 parts paint to 1 part thinner. Please note that Metalcote colours are designed to be polished after complete drying.
7. Humbrol No 16 Gold Metallic
Usage
A solvent-based, fast-drying paint designed for use on plastic model kits, but can also be applied to other surfaces. Available in matte, satin, gloss, metallic, metal coat, and clear finishes (the gloss varies depending on the color).
Surface
A variety of surfaces, including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard, and more (always test suitability on a small area first).
Coverage
A 14 ml can covers approximately 0.3 m², depending on the thickness of the layer.
Application
Apply directly from the can with a brush. Spray with a suitable thinner like Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that metal coat paints are intended to be polished once fully dry.
Drying Time
Gloss: 1-2 hours
Matte & Satin: 20-40 minutes to dust dry, up to 24 hours for hard dry
Metallics: hard dry in about 10 days. Drying times vary depending on ambient temperature and humidity. Recoating: at least 6 hours (preferably overnight).
Cleaning Instructions:
Brush: Use Humbrol Enamel Thinners
Airbrush: rinse thoroughly with Humbrol Enamel Thinners. The product is permanent once dry.
8. Humbrol No 32 Dark Grey Matt
Usage
A solvent-based, fast-drying paint designed for use on plastic model kits, but can also be applied to other surfaces. Matte, satin, gloss, metallic, metalcoat, and clear coat finishes are available (the finish varies depending on the color).
Surface
A variety of surfaces, including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard, and more (always test suitability on a small area first).
Coverage
A 14 ml can covers approximately 0.3 m², depending on the thickness of the layer.
Application
Apply directly from the can with a brush. For airbrushing, use a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that metalcoat paints are intended to be polished once fully dry.
Drying Time
Gloss: 1-2 hours. Matte & Satin: dust dry in 20-40 minutes, up to 24 hours for hard dry. Metallics: hard dry in about 10 days. Drying times vary depending on ambient temperature and humidity. Recoating: at least 6 hours (preferably overnight).
Cleaning
Brushes: Use Humbrol Enamel Thinners. Airbrush: thoroughly rinse with Humbrol Enamel Thinners. The product is permanent once dry.
9. Humbrol No 85 Black - Satin
10. Humbrol Decalfix 125
A water-based solution for softening decals and fixing them in position. Decals are normally applied to painted surfaces. Care should be taken to avoid 'silvering' over matt colours. Apply to decals or dip in Decal Fix for approximately 45 seconds until soft. Remove with a brush and pat dry with paper towel. 20-30 minutes. Do not force dry decals as they may wrinkle or shrink. Excess product should be wiped off with a damp cloth.
Product order
See all products