Liqui Moly Bodywork adhesive spray

Contact adhesive spray with high initial bonding strength for gluing fabrics, foam rubber, leather and artificial leather, felt, cardboard, etc. together or onto rubber and metal. Also suitable for bonding PE foils in vehicle doors.

Application: The surface to be bonded should be free of dirt, oil, and grease to ensure optimal adhesion. Depending on the size of the bonding area, the desired spray pattern can be adjusted by turning the spray head. The body adhesive spray is then applied to the surface at a distance of 20 cm to 25 cm. Before the materials are joined, a drying time of approximately 10 minutes must be observed.

Note: Adhesive residue can be removed with paint thinners or acetone. After use, hold the can with the spray head facing down and press the valve until only propellant gas is released.