Etherma Heating mat 130W/sqm 943W 7,25sqm 1Cold 40881

Etherma underfloor heating 132-NST5-1450

Manufacturer: Etherma
Designation: Underfloor heating 7.25 sqm, 50 x 1450 cm, 943 W
Type: 132-NST5-1450
Design: Other
With support mat: Yes
Fixing of the heating conductor: Glued
Self-adhesive: Yes
Supply voltage: 230 V
Connected load: 943 W
Output: 130 W/m²
Heating conductor load: 10 W/m
Resistance: 56 Ohm
Number of PTC thermistors: 1
Length of PTC thermistors: 4000 mm
Suitable for damp rooms: Yes
Suitable as outdoor heating: No
Suitable as roof heating: No
Surface area: 7.25 m²
Length: 14500 mm
Width: 500 mm
Thickness: 3.3 mm
With controller: No
With room thermostat: No
With floor temperature sensor: No

The NST mesh heating mat is a factory-made heating mat that is mechanically and chemically resistant due to a very strong outer sheath and is therefore particularly robust. It is ideal for installation in chemically aggressive environments such as public toilets, bathrooms, or paint shops, as well as wherever concentrated cleaning agents are used. The Teflon-insulated inner and outer insulation makes the heating cable very robust. The NST net heating mat is used for temperature control of floors, heating of rooms, cold insulation on walls, and also as open-space heating for installation in thin beds. The very low height of 3.3 mm allows for a particularly low floor build-up when renovating ramps, walkways, and driveways. The dipole design guarantees easy installation in tile adhesive and mortar beds, in GRP beds, and much more. The NST mains heating mat has only one connection cable, and the dipole heating conductor makes it very low in magnetic fields.

Outer and inner sheath: Teflon insulated, maximum temperature resistance up to 150 °C, heat conductor thickness: 3.3 mm, protection class: IP X7, grid: 12.5 x 12.5 mm, CE conform, protective measure: residual current circuit breaker 30 mA, standard connection cable: 4 m, 2 x 1.0 (1.5) mm² + protective braiding. EAN: 9120105410151.