Etherma Heating mat 130W/sqm 140W 1.08sqm 1Cold 40874

Etherma floor heating 132-NST5-215

Manufacturer: Etherma
Designation: Floor heating
Area: 1.08 sqm
Power: 140 W
Voltage: 230 V
Type: 132-NST5-215
Design: Other
With support mat: Yes
Fixing of the heating conductor: Glued
Self-adhesive: Yes
Supply voltage: 230 V
Connected load: 140 W
Output: 130 W/m²
Heating conductor load: 10 W/m
Resistance: 378 Ohm
Number of PTC thermistors: 1
Length of PTC thermistors: 4000 mm
Suitable for damp rooms: Yes
Suitable as open space heating: No
Suitable as roof surface heating: No
Surface area: 1.08 m²
Length: 2150 mm
Width: 500 mm
Thickness: 3.3 mm
With controller: No
With room thermostat: No
With floor temperature sensor: No

Further details:
The NST mesh heating mat is a factory-made heating mat that is mechanically and chemically resistant due to a very strong outer jacket, making it particularly robust. It is ideally suited for installation in chemically aggressive environments such as public toilets, bathrooms, or paint shops, as well as in areas where concentrated cleaning agents are used. The PTFE-insulated inner and outer insulation enhances the robustness of the heating cable. The NST net heating mat is designed for temperature control of floors, heating of rooms, cold insulation on walls, and as open-space heating for installation in thin beds. The low height of 3.3 mm allows for a minimal floor build-up when renovating ramps, walkways, and driveways. The dipole design ensures easy installation in tile adhesive, mortar beds, GRP beds, and more. The NST mains heating mat features only one connection cable, and the dipole heating conductor minimizes magnetic fields.

Outer and inner sheath: PTFE insulated, maximum temperature resistance up to 150 °C, heat conductor thickness: 3.3 mm, protection class: IP X7, grid: 12.5x12.5 mm, CE conform, protective measure: RCD protection circuit 30 mA, standard connection cable: 4 m, 2x1.0(1.5) mm² + protective braiding.