Etherma Heating mat 130W/sqm 709W 5,45sqm 1Cold 40880

Etherma floor heating 132-NST5-1090 Manufacturer :Etherma Designation :Floor heating 5.45sqm,50x1090cm709W Type :132-NST5-1090 Design :other With support mat :yes Fixing of the heating conductor :Glued Self-adhesive :yes Supply voltage :230 V Connected load :709 W Output :130 W/m² Heating conductor load :10 W/m Resistance :75 Ohm Number of PTC thermistors :1 Length of PTC thermistors :4000 mm Suitable for damp rooms :yes Suitable as outdoor heating :no Suitable as roof heating :no Surface area :5.45 m² Length :10900 mm Width :500 mm Thickness :3.3 mm With controller :no With room thermostat :no With floor temperature sensor :no Etherma underfloor heating 132-NST5-1090: more details The NST mesh heating mat is a factory-made heating mat that is mechanically and chemically resistant due to a very strong outer sheath and is therefore particularly robust. It is ideal for installation in chemically aggressive environments such as public toilets, bathrooms or paint shops, as well as wherever concentrated cleaning agents are used. The Teflon-insulated inner and outer insulation makes the heating cable very robust. The NST net heating mat is used for temperature control of floors, heating of rooms, cold insulation on walls and also as open-space heating for installation in thin beds. The very low height of 3.3 mm allows for a particularly low floor build-up when renovating ramps, walkways and driveways. The dipole design guarantees easy installation in tile adhesive and mortar beds, in GRP beds and much more. The NST mains heating mat has only one connection cable and the dipole heating conductor makes it very low in magnetic fields. Outer and inner sheath: Teflon insulated, maximum temperature resistance up to 150 °C, heat conductor thickness: 3.3 mm, protection class: IP X7, grid: 12.5x12.5 mm, CE conform, protective measure: residual current circuit breaker 30 mA, standard connection cable: 4 m, 2x1.0(1.5) mm² + protective braiding. , EAN: 9120105410137.