Etherma Heating mat 130W/sqm 91W 0.7sqm 1cold 10W/m 40873

Etherma Underfloor Heating 132-NST5-140

Manufacturer: Etherma
Description: Underfloor heating 0.7 sqm, 50 x 140 cm, 91 W
Type: 132-NST5-140
Version: other
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: yes
Connection voltage: 230 V
Connection power: 91 W
Power: 130 W/m²
Heating conductor load: 10 W/m
Resistance: 581 Ohm
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 0.7 m²
Length: 1400 mm
Width: 500 mm
Thickness: 3.3 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

The NST heating mat is a factory-fabricated heating mat that is mechanically and chemically resistant due to its very stable outer jacket, making it particularly durable. It is ideally suited for installation in chemically aggressive environments such as public restrooms, bathrooms, or paint shops, as well as anywhere concentrated cleaning agents are used. The Teflon-insulated inner and outer insulation allows for the high robustness of the heating conductor.

The NST heating mat is designed for heating floors, heating rooms, cold insulation on walls, and also as outdoor heating for installation in thin bed. Its very low height of 3.3 mm allows for a particularly low floor structure when renovating ramps, walkways, and driveways. The dipole design guarantees easy installation in tile adhesive and mortar beds, in fiberglass reinforced plastics, and much more.

The NST heating mat has only one connection lead, and due to the dipole heating conductor, it is very low in electromagnetic fields. Outer and inner jacket: Teflon insulated, maximum temperature resistance up to 150 °C, heating conductor thickness: 3.3 mm, protection class: IP X7, grid spacing: 12.5 x 12.5 mm, CE compliant, protective measure: RCD protection circuit 30 mA, standard connection lead: 4 m, 2 x 1.0 (1.5) mm² + protective braid. EAN: 9120105410144.