Etherma Heating mat 130W/sqm 286W 2.2sqm 1Cold 40876

Etherma Underfloor Heating 132-NST5-440

Manufacturer: Etherma
Description: Underfloor heating 2.2 sqm, 50 x 440 cm, 286 W
Type: 132-NST5-440
Design: other
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: yes
Connection voltage: 230 V
Connection power: 286 W
Power: 130 W/m²
Heating conductor load: 10 W/m
Resistance: 185 Ohm
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 2.2 m²
Length: 4400 mm
Width: 500 mm
Thickness: 3.3 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

Additional details:
The NST heating mat is a factory-prepared heating mat that is mechanically and chemically resistant due to its very stable outer shell, making it particularly durable. It is ideally suited for installation in chemically aggressive environments such as public restrooms, bathrooms, or paint shops, as well as anywhere concentrated cleaning agents are used. The Teflon-insulated inner and outer insulation allows for high robustness of the heating cable. The NST heating mat is used for floor temperature regulation, room heating, cold insulation on walls, and also as outdoor heating for installation in thin layers. The very low height of 3.3 mm enables a particularly low floor structure when renovating ramps, walkways, and driveways. The dipole design ensures easy installation in tile adhesive and mortar beds, in fiberglass mats, and more. The NST heating mat has only one connection cable and, due to the dipole heating conductor, it has very low electromagnetic field emissions.

Outer and inner shell: Teflon-insulated, maximum temperature resistance up to 150 °C, heating conductor thickness: 3.3 mm, protection class: IP X7, mesh grid: 12.5 x 12.5 mm, CE compliant, protective measure: RCD protection circuit 30 mA, standard connection cable: 4 m, 2 x 1.0 (1.5) mm² + protective braid.