Networking

Hello together Is 10 Gbits data throughput realistically possible over unshielded Cat6 network cables (U/UTP)? I prefer Cat6 to Cat6A/Cat7 as the cables are thinner and therefore more than one can fit into an existing conduit. In my case, the cables would not be longer than 30 metres and I would use Cat6A for the sockets.

  0

Hello together I'm turning to you because I'm a bit stuck with my hobby of IT flair and IT guides, YouTube and the insatiable market don't give me enough objective transparency. The following facts: I live in a modern 3.5-room shared flat with a 10 Gb fibre optic connection. My goal is to set up my own home lab with my own cloud administration for documents, photos, video recordings from the surveillance cameras in the living area, Bitwarden PW hosting, VM experiments and hosting of game servers (e.g. Ark Survival Ascended, Minecraft, etc.). I also want to change my current network provider soon and get a new router that comes with some security features (e.g. DVPN/ VPN/ IPVPN, anti-malware proxy, etc.). Roughly speaking, I want the greatest possible flexibility and centralisation of my documents and applications with high security standards. As I work for a public authority, data protection is very important to me. I also want to protect my personal data as sensibly as possible. Questions: The main question for me is the hardware. Starting with the NAS, I'm unsure whether a brand of home-made equipment or a shelf product is the better choice, especially considering the electricity costs, but also the requirements for permanently hosted game servers. I'm completely at a loss when it comes to the network and would be grateful for advice from "good" network providers and high-performance components. A big thank you to all ICT cracks who take the time to help me with my problems ;)

  3

Hello everyone, I’m planning a network upgrade and looking for a good combo of a Wi-Fi 7 access point with 6 GHz support and 4×4 radio configuration plus a 24-port switch with 2.5 GbE.

  2

Has anybody been using MoCA adapters in Switzerland? Many may have unused CableTV instalations in your homes, it could be a cheap way of extending your network with 2.5Gbs. "MoCA stands for Multimedia over Coaxial Alliance. It is a type of connection that uses the existing coaxial wiring in a building to deliver high-speed internet throughout the home, but without the hassle of drilling holes or running additional cable." Would be nice if Digitec would look into offering a variety of adapters, ie: goCoax, Asus, etc.

  3

Hello together I've been the owner of the black Box X6 from Salt since yesterday. The WIFI signal has improved minimally, but there are massive setbacks in other areas compared to the white box. With the old box, for example, it was possible to connect a USB hard drive and integrate it into the network as a network drive. This no longer seems to be possible with the new box, or I am simply too stupid to find the necessary setting in the GUI of the box...Has anyone had similar experiences with the box? LG Philipp Strahm

  3

What are the possibilities to improve my DSL Internet from Wingo? Current setup: Wingo performance Download approx. 350 mbps / Upload 100 mbps Hardware: Internet-Box 3 and 3x WLAN-Box 2 as repeater Depending on the area in the house, I only receive 100 down and 6 up speeds I would like to switch to Ubiquiti Cloud Gateway Ultra and add a few Ubiquiti U6s to improve performance. Would that work at all? Thanks for your help

  3

Hello, Does the second SIM card (5G) offered with Galaxus subscriptions work in a 5G router? For example: https://www.galaxus.ch/fr/s1/product/xiaomi-5g-cpe-pro-routeur-32724956?ip=Xiaomi+5G+CPE+Pro If so, is the throughput OK (with good 5G reception, of course)?

  2

I would like to connect my ZYXEL XMG1915 switch to an HP 2530 Aruba switch with a fibre optic cable. The distance in between is approx. 30 metres. Which SFP connector do I need for the ZYXEL connector? Which SFP connector do I need for the HP 2530 Aruba Switch? Which fibre optic cable do I need?

  1

Is there a way to display routers or access points that support WPA3 without time-consuming searching?

  1

I would like to know the quality of this Wi-Fi router :TP-Link Deco XE75 Pro. https://www.galaxus.ch/fr/s1/product/tp-link-deco-xe75-pro-routeur-23483955 Does anyone use this Wi-Fi router?

  1

Hello, I have hardly any mobile reception in the hobby room, surfing is hardly possible. WLAN/Wifi is not available there (other house). Is it possible to boost the 4G/5G reception for an iPhone? Possibly with an external aerial or an amplifier? Costs should be kept within limits as it is a temporary solution.

  2

Hello everyone! I would like to connect another router using the Ethernet adapter from starlink. Has anyone had any experience of which one would be best? My main concern is to have better range. Thank you!

  1

PLEASE HELP if you are familiar with Ubiquiti products! I have a 4 story townhouse. Ethernet wiring throughout. Currently use multiple stand-alone WiFi routers with additional Ethernet ports. We often move from floor to floor so a MESH WiFi network is required. Especially for mobile phone calls as 4/5G signal is weak enough that the phones' "WiFi Calling" feature makes a huge difference. Also constantly switching from one SSID to another on our phones has become problematic. **Basement is the source for Internet via Fibre. It has the standard Salt Fibre Box with 4-5 Ethernet ports **Ground Floor is living room. Needs WiFi and at least 4+ Ethernet ports for TV, Sonos, AppleTV, NAS .. **First floor is office & bedrooms. Needs WiFi and at least 3+ Ethernet ports for Work PC, Printer, other. **Second floor is bedroom. Needs Wifi and at least 2+ Ethernet ports for Work PC, other. In summary, I need three [3] mesh WiFi APs but they each also need to have Ethernet ports - let's call each one a "machine"... Is it possible to have a powerful Ubiquiti Switch/Router in the basement with enough PoE that could power these three separate machines? I realise I don't actually need numerous Ubiquiti wall mounted dome WiFi APs, unless they are in addition to the "machines" I require. I might also need a fourth [4] Machine in the Basement - if I disable the WiFi on the Salt Fibre Box and enable the Ubiquiti sourced WiFi to allow complete seamless roaming for the entire town house.

  5

I live in a house with two floors. Each of the two floors covers around 200 square metres. Some of the walls and ceilings are very thick. We have several laptops, tablets, mobile phones and IOT devices (cameras, hoovers, lamps) that need to be connected to the internet. Around 20 devices in total. My current setup looks like this: - The Wingo Internet Box 2 is used as the modem - The Wingo Internet Box 2 is not used as a WIFI router. Instead, I use a Netgear R6800 for WLAN via Ethernet cable, which experience has shown to have better performance - The signal from this router can basically be received everywhere, but the speed is weak in some places - I also have several Netgear EX6120 range extenders in use - LAN cables are not an option, the house is old and the effort would be too great It actually works quite well for everyday use. Thanks to the range extenders, the speed is quite good everywhere (about 70Mbps download everywhere instead of 100Mbps, which is possible directly with the Wingo Internet Box), but there are days when it's not ideal. Another disadvantage is that I have to use different SSIDs in different rooms. It can also happen that both download and upload speeds drop completely if two devices have increased data consumption at the same time. For example, Zoom on one device and YouTube on a second device. I would now like to tackle this problem and have several questions: - Does it make sense to ask Wingo for a new router, or is the current model sufficient for 20 connected devices? - I think a mesh system makes sense. What is recommended and offers good value for money? I would be grateful for specific suggestions. Ideally, it should be a setup that will still be up to date in 4-5 years, even if I connect more devices by then.

  0

Bonjour, Galaxus/Digitec pensez-vous pouvoir vendre cet article, TP-LINK T1700X-16TS 8ports 10Gb + 4ports 10Gb combi SFP+/RJ45 ? https://www.tp-link.com/fr-ch... Merci.

  0

Hello everyone, I bought a Kettler 600 bluetooth fitness bike and put it in a maid's room 8-10 metres from my Swisscom fibre router. The room is separated from the router by 2 walls and 2 wooden doors. I get good wifi reception. My iPad bluetooth 5.3 connects to the bike but not the Kinomaps video application. I've looked at Bluetooth repeaters but they seem to be designed to extend audio only. Is there a solution to this problem? Thank you very much for your answers.

  0

I live on the 3rd floor and have a hobby room with an Internet connection in the basement. What exactly do I need to buy and install so that I can also use Wifi in the hobby room? My Internet supplier is Sunrise.

  3

Hello everyone I am planning to change my internet provider UPC/Sunrise (the customer service is sub-par) in May, probably to I-Way, who have taken over the city network from EWB. Now my question; does anyone have any experience with EWB's fibre optic network, I haven't found anything on the net. Who would you favour I-Way or Init7. I'm not an Internet-Nurd, I'm a normal user or maybe a super user.

  0

Hello, I have windows fitted with electric roller shutters in my new flat. I'm currently equipping the whole flat with Philips Hue and I'm using the Apple HomeKit application. My question is: is there a way to connect the shutter switches via Wi-Fi that is compatible with Apple HomeKit and Philips Hue? What do I need to do? I'd like to thank you in advance for your help and wish you all the best for the rest of the day.

  0

Can you please advise me on the following problem: - In order to connect the inverters to the rest of the photovoltaic system / internet, I am looking for a suitable WLAN access point where I can activate port 49049. - The distance from the router to the inverter is approx. 10 m and there is a concrete wall in between. - The data throughput is low - No. of Ethernet ports: 2 - No PoE (as I don't know if the existing installation already supports this, or as an option. A power supply unit should be included in the delivery). - Mounting type: Wall / Indoor - No consumer product Many thanks for your support and kind regards

  1

Hi, I am looking for a modem with which I can replace my Swisscom Internet Box and still use Swisscom TV. It should therefore have IGMP snooping. Do you have a tip? Thanks

  2

TP-Link and Tapo network cameras are from the manufacturer TP-Link. Can these cameras be managed via an identical app? If so, which app is required? Can several participants access the cameras?

  1

Good evening. I have the Internet box and a WLAN box from Swisscom. Both are on the same floor. Now I would like to extend the WLAN to the upper floor and am looking for a good amplifier. Who can recommend something? Thank you very much.

  2

Dear Community I have a quick question on the topic of Mesh Repeaters. We have a hobby room in which we currently have no Wi-Fi reception. The room is outside our flat, half a floor up and about 10 metres away as the crow flies (the wall of the flat and the room are in between). In general, WLAN reception seems to be possible in the room (I am sporadically shown the WLAN of a neighbour). Now my question: Is this something a mesh repeater can do or is the attempt hopeless? Unfortunately, wiring would be relatively expensive >1'500.-. If possible, can anyone recommend a mesh repeater that can do this or even the Swisscom Box 3 (we have the internet via Swisscom). Many thanks for the help 🙏

  6

Hello I have a house with two flats occupied by the family. Do I need to buy 2 routers or is one enough with Starlink?

  4

I am looking for a mesh system. I have a 10GB line. I have the Zyxel AX7501-B0 router. https://www.digitec.ch/de/s1/product/zyxel-ax7501-b0-router-13457903 I have found the Multy X: https://www.digitec.ch/de/s1/product/zyxel-multy-x-mesh-system-2er-set-router-6840469?ip=Multy+x My question is can I connect the Multy X to the router or is it more worthwhile to connect a Multi X to the router and then set up a network. I am looking forward to feedback. Greetings

  0

Hello users of the above cameras Can the TP-Link and Tapo cameras be used via the identical app? Which app is compatible here? Can several participants access the same cameras? Thank you very much for your help. I wish everyone a nice day despite the continuous rain ;-)

  0

Hello all I have a mobile hotspot at home. Reason: this offers faster internet than the cable modem. Now the network should work over 3 floors. I have a repeater (Netgear WN3000RP I know is already older). Now the devices always switch between the routers. They shouldn't because I have connected devices closer to the repeater (printer, Sonos box, HomePod and AppleTV). What do you recommend here? Buy a router, use it as a bridge and configure a separate IP address e.g. 192.168.1.250 and then ascending from this number?

  1

I'd like to ask Digitec to add PXO-2401CR - Kompakter Stromverteiler mit 4x 200-240V IEC C13 Ausgängen von Raritan to their Raritan product selection but find no way to do it. Any suggestions would be very appreciated. Thanks. Alx

  1

Which router would be suitable for: Obtain internet via a SIM card, distribute this via Ethernet and WLAN in the house? The performance at the end device is important.

  1