Network cables

+2

  7

Why can't I find flat network cables with 30m or longer? There are dozens on Amazon.

+1

  6

I have a Salt plan with fibre optics and need a network cable to connect the TV box to the router. It needs to be about 10 metres long. Any recommendations?

  1

The fibre optic cable that comes with the Zyxel AX7501-B1 router for the Galaxus 10 Gbit/s fibre plan is very short. I want to buy a longer one, but I'm not sure exactly which one I need. The plugs on the supplied cable are green, which indicates APC cut. I'm currently using a different single-mode cable with a blue SC connector in the router, and the connection seems great (>1Gbps).

  2

I am looking for a network cable that is thinner than usual. As thin as possible in order to pull it through a narrow empty conduit. Is there anything available? Under 5.4mm diameter

  2

  2

For training purposes (cable assembly) I am looking for - Cable reels (100m/305m) - RJ45 plugs (pack of 50 / 100) Both must fit together, be Cat6 or higher, and attractively priced. :) No "field-attachable" plugs, but plugs that can be assembled with a simple crimping tool.

  0

Which manufacturer labels its cables or plugs with the length of the cables?

  2

My latest laptop only has an ix Ethernet connection. An adapter cable to RJ45 was included, but at 3 metres it is far too long for me. DigitecGalaxus does stock ix-Ethernet cables, but only with ix plugs on both sides, no adapter cables to RJ45. Are such adapter cables (e.g. from these here: https://b2b.harting.com/ebusiness...) in Zukunft auch ins Programm aufgenommen?

  0

Hello together I have a question about the BKS cable. Every room in the flat has an Internet connection, but unfortunately it's all with BKS. These are already equipped with 10 gbits, but it's a pain to always look with this company and you can't buy freely in the market. Can I simply cut them off and attach an RJ-45 cable? Or do I have to rip out all the cables and pull new ones? Thanks in advance Greetings Duri

+1

  13

I am setting up a home network in the new flat with a switch. What kind of cable do I need for a high speed? 1000mbits is the goal. Thanks in advance

  4

I want to lay a 10Gbit network cable in the house. Which cable and which associated sockets do I need to buy for this? For example: https://www.digitec.ch/de/s1/product/roline-installationskabel-100m-sftp-kat-7-netzwerkkabel-7676948

  2

  2

I am looking for a network cable for cabling in the building in existing tubes in the wall. It should be flexible and support 10 Gbps. Can you recommend something and maybe some connectors that don't require tools for installation?

  3

+5

  17

Evening all, Does anybody have any recommendations for network cables? I have a high-end desktop PC which can accommodate 10 gigabits/sec network speeds and an internet connection with the same specification via fibreglass. I would like to connect the PC to the internet box via a network cable (distance is roughly 20m) and thus have the following questions: - Fibreglass or copper cable? - CAT 5E/6/6A/6E/7/8? Speed is my primary requirement. Many thanks

  1

Hello To connect a UniFi camera to a UniFi switch, I need a 20m long LAN cable. Because the UniFi manual https://dl.ui.com/qig... shows a special, flexible "LAN cable head", I wanted to ask for advice here. In the UniFi forum, however, this was criticised as pure Marketing and I was also advised to pay attention to Cat5e, Cat6, Cat6a and not to use CCA cable (copper-clad aluminium) instead of pure copper core. Any tips!

  2

Hello Can the Reolink go camera be connected to a router via Ethernet? Does the Reolink go have an Ethernet connection? Thanks for your response.

  0

Good evening I am making my first experiences with POE capable devices. I would like to connect a Ubiquiti POE switch (outdoor capable) to my G5 Bullet camera which requires a 10 metre network cable. But which cable of this length supports POE and is still thin if possible? Does anyone have any ideas or suggestions? Thank you very much Rob

  1

I am looking for a 15 metre long RJ45 cable for outdoors. It is to connect our house and the garden shed, but is permanently exposed to the weather. What would be suitable? Simply an STP Cat7?

  6

  2

+2

  11

Hello, Does anyone know if halogen-free flat cables exist or if the two properties combined are not possible with LAN flat cables? Maybe someone knows.

  1

  7

I have a LAN connection and use it to run a PC. Now I would like to connect a second laptop to it, better than with WLAN, but it only runs when the PC is not switched on. Which distributor do you recommend? It doesn't have to be one that has a power supply. Just a connector for 2 LAN cables.

  5

  2

Hello together. I am looking for a patch cable where the plug does not lock in place but can simply be pulled out. Is there such a thing?

  4

+2

  13

Who can tell me a cable type as well as the matching plugs for it, preferably with Digitec article number? The cables and plugs should be Cat6 or higher, for crimping (not field-terminable) and cable reels from 100m to 305m. It has to fit together because we need these cables and plugs in the basic training for students; easy to assemble and still working.

  2

Where can I find a Y-network cable 1xRJ45 to 2xRJ45, preferably shielded and short, for use in the distribution cabinet?

+4

  13