Best products in the Sealant category
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. MEM Water Stop
MEM Water Stop is a universal waterproofing based on the latest SMP technology. Fields of application: The product can be applied in virtually all areas of the house for waterproofing. For example: Roof, wall, bathroom and shower, basement, etc. - The flexible sealant is suitable for use on a wide variety of substrates such as wood, concrete, stone, metal, polystyrene and plastic - the product is not sensitive to moisture during curing. Substrate and application: The substrate must be solid, load-bearing and even and free from oil, grease, dust and other separating layers. When applying MEM Water Stop, the substrate must be slightly damp, but not wet with a visible film. Consumption: Approx. 2.3 - 3.1 kg/m2 (with two coats).
2. Dripex Insulating foil
Perfect for roof, floor and wall insulation. Double layer aluminium insulation foil, non-toxic, heat insulating, waterproof and vapour-proof, noise protection, 100% recyclable. Very good insulation with minimum thickness and weight (1.45kg). Suitable for windproofing and moisture protection in all insulated constructions. A total of 6㎡ can be insulated.
3. Steffen Magic Gel 300, IP68
Magic Gel is the little miracle cure for simple and safe sealing. The self-crosslinking, polymeric two-component agent only needs to be mixed in the same proportion; as soon as the gel is filled, it encloses cables and clamps within a few minutes. The gel is non-toxic, guarantees IP68 protection and can be easily removed.
4. Coltogum Spreadable sealant transparent 1l
Ready-to-use, brushable & permanently elastic 1-component sealant with a high proportion of synthetic fibres, reinforced on a copolymer basis, which keeps the seal easily and immediately.
Coltogum Spreadable sealant transparent 1l
1 kg, Transparent, 1000 ml
5. Cramer Silikondüse
For plastic cartridges with coarse thread - facilitates sealing in hard-to-reach places.
Rotatable nozzle for plastic cartridges with coarse thread - facilitates sealing in hard-to-reach places. Nozzle tip with three 45° predetermined breaking points - for clean beads in different widths. Nozzle cap with screw cap - prevents the sealant in the cartridge from drying out quickly. Contents: 4 silicone nozzles with caps.
Cramer Silikondüse
0.02 kg, White, Transparent
6. MEM Water Stop, 290 ml
MEM Water Stop is a permanently elastic moisture barrier and can be used both indoors and outdoors.
The universal waterproofing is suitable for use on a wide variety of substrates such as concrete, wood, stone, metal, sanded roofing felt, polystyrene and many plastics.
The product is insensitive to moisture during curing.
MEM Water Stop, 290 ml
Dgrey, 290 ml
7. MEM Dense Fix
Mem Dicht-Fix is the sealing compound for all small repairs and sealing measures. Immediately absolutely waterproof, even in rain, snow and frost up to -5°C. - Perfect for outdoor use- Resistant and safe in rain, snow and frost- Highly elastic and waterproof- Dralon and carbon fiber reinforced. Crack covering up to 10mm- UV resistant and non-porous- Adheres to all structural substrates even on damp or wet. Consumption: 2kg/m2.
8. MEM Repair asphalt
Mem Reparatur Asphalt is a ready-to-use asphalt mixture for filling potholes. It is characterized by an intensive effect and the highest quality. Properties and fields of application: In addition to filling potholes, the cold-processable mixture is ideal for repairing road damage, closing cracks and creating ramps It is suitable for both private and public areas and can be used on damp substrates The mixture is highly compatible with bituminous construction materials and contains no volatile solvents. Intensive effect: Mem Reparatur Asphalt consists exclusively of environmentally friendly raw materials and is recyclable. It has a grain size of 0/3 mm and hardens in combination with water after a very short time. After compaction, the mixture is immediately stable and trafficable and can be overpaved without any problems. In addition, it is resistant to frost and weathering and can be laid without the use of machinery. Easy application: For effective application, damaged areas or fractures must be straightened at the edges beforehand and cleaned of dust, dirt and loose components. In the case of concrete or unfavorable substrates, adhesion can be improved by using Mem primer. Consumption: Depending on compaction, approx. 25 kg/m2 per cm paving thickness.
9. MEM Bitumen spray
Practical for small roof repairs: Mem Bitumen Spray. Simply shake it, remove the cap, press it on, and you're done. The sprayable bitumen is characterized by easy application and pinpoint spraying without additional tools. Ideal for sealing connections and for minor repairs, especially in the roof area. Perfect for transition areas from metal and roofing felt. Adheres to many different substrates such as metals, mineral substrates, roofing felt and wood. Is fast drying and does not drip. Salt and water resistant.
10. Sika Sikagard-907 W
Sikagard 907 W is a 1-component, UV-resistant, aqueous plastic dispersion. Sikagard 907W brings double benefit. It protects porous surfaces from water and oil stains and consolidates joint sand. Application - Pedestrian areas and pavements, terraces, parking lots and ramps, driveways and courtyards, sidewalks, natural stone paving, concrete paving. No thinner required. Environmentally friendly, solvent-free UV and weather resistant. Easy application, protection against oil, diesel and water. Reduces contamination by hydrocarbon-based media. Resistant to de-icing salt, improves freeze-thaw resistance. Prevents weed growth in the joints. Allows the joints to "breathe" and reduces sand abrasion. Facilitates the cleaning of surfaces. Reduces the maintenance effort and reduces efflorescence.