Shoe Goo 109.4 ml

Shoe Goo is ideal for repairing worn-out soles or damaged heels, coating shoes to prevent premature wear, and sealing rubber boots. The unique formula is designed for strong abrasion resistance and better adhesion on flexible materials. It bonds, protects, and repairs sustainably. Excellent sealant - perfect for patching small holes. Waterproof - the bond remains secure even when exposed to water. Provides extra grip - can be perfectly used for skateboarding. The surface should be clean, dry, and free from dirt. Use the cap to puncture the seal in the tube neck. The ideal application temperature range is between 10 and 32 ºC. However, fully cured adhesive can withstand temperatures from -40 to 82 ºC for short periods. Apply directly to the surfaces to be protected, bonded, or repaired. For sealing and protection, use thin layers applied with a disposable tool to build up a thick layer, allowing each layer to cure for 3-4 hours. Let the repair cure for 24 hours. Depending on the material and temperature, maximum strength may not be reached until after 48 to 72 hours. To easily remove the cap in the future, apply a thin layer of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with acetone or citrus-based solvents. Cured material can be removed by cutting or scraping.