Bemero Microphone & line cable

Microphone and line cable, black. Microphone and line cable with symmetrical signal transmission. Length: 50 running meters on a reel. PVC outer jacket and PE insulation. Shielded twisted-pair cable. Conductor cross-section: 0.22 mm², overall diameter: 6.5 mm (± 0.2 mm), AWG: 24. Wiring: Pin 1 = Ground (shielding, ground), Pin 2 = Signal (hot), Pin 3 = Signal- (cold). Symmetrical vs. asymmetrical signal transmission. Whether on stage, in the studio, or in the rehearsal room, asymmetrical signal transmission has no place there and should be avoided as much as possible or kept as short as possible and quickly converted to symmetrical. Unless it involves low-impedance instrument or speaker signals. Guitar cables, for example, are asymmetrically (unbalanced) wired. A symmetrical (balanced) cable consists of two signal conductors: Pin 1 for signal hot, Pin 2 for signal cold, as well as a ground conductor. The signal conductors are twisted against each other. The ground serves as a shield. Since the signals on the conductors are out of phase, interference is canceled out. A symmetrical cable is therefore much less susceptible to interference and ground loops over longer distances than an asymmetrical cable ever will be. Bemero for your projects. Bemero provides you with a selected portfolio of accessories for studio and stage that are essential for the realization of your projects. So go ahead and make your next big thing. Bring your project to life, and Bemero supports you with the necessary little helpers, including this cable.