Humbrol No 102 Army Green Matt

Usage
A solvent-based, fast-drying paint designed for use on plastic model kits, but can also be applied to other surfaces. Matte, satin, gloss, metallic, metal coat, and clear coat finishes are available (the finish varies depending on the color).

Surface
A variety of surfaces, including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard, and more (always test on a small area first for suitability).

Coverage
A 14 ml can covers approximately 0.3 m², depending on the thickness of the layer.

Application
Apply directly from the can with a brush. For airbrushing, use a suitable thinner like Humbrol Enamel Thinners. Two thin coats are preferred over one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that metal coat paints are designed to be polished after fully drying.

Drying Time
Gloss: 1-2 hours
Matte & Satin: 20-40 minutes to dust dry, up to 24 hours for hard dry
Metallics: hard dry in about 10 days. Drying times may vary depending on ambient temperature and humidity. Overcoating: at least 6 hours (preferably overnight).

Cleaning Instructions:
Brush: Use Humbrol Enamel Thinners
Airbrush: rinse thoroughly with Humbrol Enamel Thinners. The product is permanent once dry.