Best selling Floor heating from Devi
On this page you'll find a ranking of the best Devi products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Devi Heating tape Pipeheat DPH 10 98-300071 2m 10W/m 230V ready to plug in
Devi heating cable DPH-10 230V 2m
Manufacturer: Devi
Designation: Heating cable plug-in confection
Type: DPH-10 230V 2m
Cable type: Self-limiting parallel
Max. holding temperature: 65 °C
Heat output: 10 W/m
Shielding: Braiding
Rated voltage: 230 V
Height: 5.3 mm
Width: 7.2 mm
Length: 2 m
Colour: Blue
Application: Pipe trace heating
Further details: Pre-assembled, ready-to-plug, self-limiting heating tape for pipe trace heating as frost protection. Mounting on pipe, rated voltage 230 V, rated power 10 W/m at +10°C, rated limiting temperature: switched on 65°C / switched off 85°C, smallest bending radius 35 mm, minimum installation temperature -30°C, outer sheath thermoplastic, PTC thermistor 2.0 m 3 x 1.5 mm², length: 2 m.
2. Devi Thin-bed set 300 W, 2.0qm 140F1652 with WLAN thermostat
Danfoss Thin Bed Set 300W 140F1652
Manufacturer: Danfoss
Designation: Thin Bed Set 300W
Type: 140F1652
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-300 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 2 m²
Length: 4000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Danfoss Thin Bed Set 300W 140F1652: additional details
Thin bed set with Wi-Fi thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and has been specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor temperature system is particularly suitable for retrofitting in irregular and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated temperature limit: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.0 m².
3. Devi Thin bed heating mat DTIF 140F0447 150W/sqm 2.0 sqm 0.5 x 4.0 m self-adhesive
Devi Thin Bed Heating Mat 140F0447
Manufacturer: Devi
Description: Thin Bed Heating Mat 150 W/m²
Type: 140F0447
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 0-300 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as surface heating: no
Suitable as roof heating: no
Area: 2 m²
Length: 4000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
Additional details:
The thin bed heating mat comes with a connection cable and a suitable sensor protection tube DN10 with a red cap. The self-adhesive thin bed heating mat is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in angular and/or large rooms, as the return of the second connection is not necessary. The heating cable, with additional protective sheath for the use of RCD protection, is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating output: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10 % / -5 %, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.0 m².
Floor heating
CHF234.–
Devi Thin bed heating mat DTIF 140F0447 150W/sqm 2.0 sqm 0.5 x 4.0 m self-adhesive
4. Devi Dünnbett-Heizmatten Set
Thin-bed set with touch thermostat, flexible sensor protection pipe DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin-bed heating mat with a connection cable is ready to install and has been specially developed for installation in levelling compound or flexible adhesive directly underneath the floor covering. Thanks to its low installation height of just 3.2 mm, it is ideal for renovating and modernising bathrooms, showers, kitchens, etc. This floor temperature control system is particularly suitable for retrofitting in angled and/or large rooms, as there is no need to run back the second connection. The heating cable with additional protective braiding for use of the residual current circuit breaker is attached to a plastic net. The length of the connecting cables is 4.0 m. PTC thermistor: 1 x 4m, 1.0 mm², voltage: 230 V, nominal limit temperature: 120 °C, specific heat output: 150 W/m², linear load: 11 W, insulation: PVDF / FEP, resistance tolerance: +10% / -5%, minimum installation temperature: 5 °C, smallest bending radius: 6 x dA, calculation width: 50 cm, delivery width: 48 cm, mat height: 3.2 mm, protection rating: IPX7, approval: EN 60335-2-96, area: 6.0 m², 0.5 x 12.0 m.
5. Devi Thin-bed heating mat set 140F0825 1-1050 W professional DTIF 7,0qm 50x140
Devi Thin Bed Set 1-1050 W 140F0825
Manufacturer: Devi
Description: Thin bed set 1-1050 W DTIF 7.0 sqm, professional
Type: 140F0825
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0..1050 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 7 m²
Length: 14000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
The Devi Thin Bed Set 1-1050 W 140F0825 includes a thin bed set with a touch thermostat, a flexible sensor protection tube DN10 with a red cap, plastic nails, and installation instructions. The self-adhesive thin bed heating mat with a connection lead is pre-assembled for installation and has been specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering.
With a low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required.
The heating cable, with additional protective sheathing for the use of RCD protection, is applied to a plastic mesh. The length of the connection leads is 4.0 m.
Cold lead: 1 x 4m, 1.0 mm²
Voltage: 230 V
Rated limit temperature: 120 °C
Specific heating power: 150 W/m²
Length load: 11 W
Insulation: PVDF / FEP
Resistance tolerance: +10% / -5%
Minimum installation temperature: 5 °C
Minimum bending radius: 6 x dA
Calculation width: 50 cm
Delivery width: 48 cm
Mat height: 3.2 mm
Protection class: IPX7
Approval: EN 60335-2-96
Area: 7.0 m²
0.5 x 14.0 m
EAN: 5703466216590.
Floor heating
CHF709.–
Devi Thin-bed heating mat set 140F0825 1-1050 W professional DTIF 7,0qm 50x140
6. Devi Heating tape in-line 10W/m 230V 40m 140F1222
The Devi heating tape, with a power output of 10W/m, 230V, and a length of 40m (model 140F1222), is an efficient solution for heating pipes and other applications that require a constant temperature. With a heating capacity of 10 watts per meter and a total length of 40 meters, this product provides a reliable heat source specifically designed for use in demanding environments. The IPX7 protection rating ensures that the heating tape is protected against water ingress, making it ideal for various applications. Manufactured in Poland, the heating tape is characterized by its high quality and durability. The striking red color not only enhances visibility but also allows for easy identification during use. The heating tape is easy to install and can be used in different scenarios to ensure frost protection or maintain a constant temperature. It is a practical choice for anyone seeking an effective and safe heating solution.
7. Devi Outdoor heating cable 30W/m 230V 14m sw 89846002
The Devi heating cable for open areas is an efficient solution for heating outdoor spaces. With a heating power of 30 watts per meter and a total length of 14 meters, this product is ideal for installation in gutters and other outdoor areas to prevent frost and ice formation. The IPX7 protection rating ensures that the heating cable is protected against water ingress, making it a reliable choice for outdoor use. The heating cable is designed in a simple black color, allowing it to blend discreetly into the surroundings. The connection cable is 14 meters long, providing flexibility for installation. This product is manufactured in Poland and offers a combination of functionality and durability.
- Heating power of 30 watts per meter for effective heating
- IPX7 protection rating for optimal water protection
- Suitable for installation in gutters
- Long connection cable of 14 meters for flexible applications.
8. Devi Thin bed heating mat DTIF 140F0448 150 W/sqm 2.5 sqm 0.5x5.0m self-adhesive
Devi Thin Bed Heating Mat 140F0448
Manufacturer: Devi
Description: Thin bed heating mat 150 W/m², 2.5 sqm
Type: 140F0448
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 0.375 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 2.5 m²
Length: 5000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
The thin bed heating mat comes with a connection cable and a suitable sensor protection tube DN10 with a red cap, pre-assembled and designed specifically for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.5 m², 0.5 x 5.0 m.
Floor heating
CHF277.–
Devi Thin bed heating mat DTIF 140F0448 150 W/sqm 2.5 sqm 0.5x5.0m self-adhesive
9. Devi Thin-bed heating mat DTIF 140F0455 150 W/sqm 8.0 sqm 0.5x16.0m self-adhesive
Danfoss Thin Bed Heating Mat 140F0455
Manufacturer: Danfoss
Designation: Thin Bed Heating Mat 150 W/m², 8 sqm
Type: 140F0455
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 0-1200 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 8 m²
Length: 16000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
Danfoss Thin Bed Heating Mat 140F0455: additional details
Thin bed heating mat with a connection cable and suitable sensor protection tube DN10 with red cap. The self-adhesive thin bed heating mat with a connection cable is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not necessary. The heating cable with additional protective sheath for the use of RCD protection is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 8.0 m², 0.5 x 16.0 m.
Floor heating
CHF977.–
Devi Thin-bed heating mat DTIF 140F0455 150 W/sqm 8.0 sqm 0.5x16.0m self-adhesive
10. Devi 140F1705
Devi Thin Bed Heating Mat Set 140F1705
Manufacturer: Devi
Description: Thin Bed Heating Mat Set 0.5 x 7.0
Type: 140F1705
Design: Heating cable with carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 0.525 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductors: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 3.5 m²
Length: 7000 mm
Width: 500 mm
Thickness: 4 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: no
Additional details:
Thin bed set with Opti clock thermostat, flexible sensor protection tube DN10, plastic nails, and installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and designed specifically for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 4 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh.
The length of the connection cables is 2.3 m. Cold conductor: 1 x 2.3 m, 2 x 1.0 mm², Voltage: 230 V, Rated limit temperature: 90 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: Lead-free PVC / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 4 mm, Protection class: IPX7, Approval: IEC 60335-2-96, Area: 1.0 m², 0.5 x 7.0 m, EAN: 5703466243237.
