Devi 140F1737 DEVImat200 200W/sqm 0.5 x 14.0 m Thin-bed heating mat

Danfoss Thin Bed Heating Mat 200 W/m² DEVImat #140F1737

Manufacturer: Danfoss
Description: Thin bed heating mat 200 W/m² 0.5x14.0m self-adhesive
Type: DEVImat #140F1737
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Power: 200 W/m²
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 1.5 m²
Length: 14000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

Danfoss Thin Bed Heating Mat 200 W/m² DEVImat #140F1737: additional details
The self-adhesive thin bed heating mat with a connection cable is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.5 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in complex and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4m, 1.0 mm², Voltage: 230 V, Rated temperature limit: 120°C, Specific heating power: 200 W/m², Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.5 mm, Protection class: IPX7, Approval: IEC 60335-2-96, Area: 0.5 m², 0.5 x 14.0 m.