
Top-rated products in the Floor heating category
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. Arnold Rak HK-8.0 Heating cable 230 V 120 W 8
Plug-in resistance heating cable according to DIN VDE 0253. Ideal for pipe trace heating. Well-suited for heating terrariums, cold frames, greenhouses, and more.

2. Devi To establish a 088U1101 WLAN connection App module
The DEVI App Module 088U1101 enables easy establishment of a Wi-Fi connection for underfloor heating systems. It is specifically designed to connect to a router, allowing the use of schedules for comfort and setback phases, as well as remote control via a smartphone. Integration with the Danfoss Icon App ensures user-friendly control and adjustment of heating parameters. This module is a valuable addition for anyone looking to modernize and optimize their heating control.
- Enables remote control of underfloor heating via the Danfoss Icon App
- Supports programming of schedules for comfort and setback phases
- Easy connection to the router for stable Wi-Fi usage.

3. Danfoss Underfloor heating electronic
Whether in new construction or renovation, the EFTI thin-bed two-pipe mat set opens up new perspectives for heating comfort and coziness. The heating system allows for quick, even warming of the floor. The large-area heat emission from the floor surface creates a healthy indoor climate, with radiant heat being perceived as very pleasant.

4. Devi Actuator
Danfoss 088H3143 Therm.actuator.

5. Danfoss Outdoor heating cable 20W/m 400V 170m sw 83902121
The Danfoss Freifläche heating cable is a powerful solution for heating outdoor areas. With a heating output of 20 W/m and a total length of 170 m, this product is ideal for installation in areas that require a reliable heat source. The heating cable is made from high-quality materials and has a rated voltage of 400 V, ensuring efficient and even heat distribution. Installation is straightforward, as the heating cable comes pre-assembled and ready to connect. Additionally, the product is UV-resistant and has an IPX7 protection rating, which protects it from water and moisture. The heating cable is certified according to IEC 60800 and offers high resistance tolerance, enhancing its durability and reliability under various conditions.
- Ready-to-install heating cable, pre-assembled for connection
- UV-resistant and suitable for outdoor use
- High resistance tolerance of +10% / -5%
- Minimum installation temperature of 5°C for flexible installations
- IPX7 protection rating for optimal protection against water and moisture.

6. Flamco delphisXpert underfloor heating manifold
DelphisXpert underfloor heating manifold E m St-An KH 1Z IG 10 HK 619x364x79mm: with TacoDrive actuator ready mounted, top meter and automatic air vent, with flow top meter plus 0-5 litres, stainless steel manifold pre-assembled on bracket, with pre-assembled KFE and enclosed connection ball valves 1" AG x 1" IG, with TacoVent automatic air vent, Eurocone 3/4" connection for heating circuits, plastic GRP-reinforced retaining bracket, suitable for heating water in accordance with VDI 2035/SWKI BT 102-01/ÖNORM H 5195-1, max. operating pressure 6 bar, max. operating temperature 60 °C, min. operating temperature -10 °C.

7. Devi Thin bed heating mat DTIF 140F0447 150W/sqm 2.0 sqm 0.5 x 4.0 m self-adhesive
Devi Thin Bed Heating Mat 140F0447
Manufacturer: Devi
Description: Thin Bed Heating Mat 150 W/m²
Type: 140F0447
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 0-300 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as surface heating: no
Suitable as roof heating: no
Area: 2 m²
Length: 4000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
Additional details:
The thin bed heating mat comes with a connection cable and a suitable sensor protection tube DN10 with a red cap. The self-adhesive thin bed heating mat is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in angular and/or large rooms, as the return of the second connection is not necessary. The heating cable, with additional protective sheath for the use of RCD protection, is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating output: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10 % / -5 %, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.0 m².

Devi Thin bed heating mat DTIF 140F0447 150W/sqm 2.0 sqm 0.5 x 4.0 m self-adhesive
8. Etherma Plug-in heating loop 10m ICE-10 100W 230V for metal pipes 40575
The ICESTOP heating cable protects pipes from ice and consequently from damage. The ICESTOP is a ready-to-plug heating cable with a constant power output of approximately 10 W/m. The encapsulated thermostat is 100% moisture-proof and activates frost protection at temperatures below 3 °C, turning off again at 9 °C. It is suitable only for metal pipes. Protection class: IP X7, compliant, minimum installation temperature: -15 °C, dimensions: 5.5 x 8.5 mm, minimum bending radius: 3 d, plug connection cable: 2 m, 230 V. ICE-10.

9. Devi Thin-bed heating mat set 140F0824 1-900 W professional DTIF 6,0qm 50x120
Devi Thin Bed Set 1-900 W 140F0824
Manufacturer: Devi
Description: Thin bed set 1-900 W DTIF 6.0 m², professional
Type: 140F0824
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-900 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 6 m²
Length: 12000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Additional details:
Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, assembly instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is unnecessary. The heating cable with additional protective sheath for the use of the RCD is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 6.0 m², 0.5 x 12.0 m.

10. Raychem R-QN-P-3.0M2/TO
NVent Thermal heating mat 230V R-QN-P-3,0M2/T0
Manufacturer: nVent Thermal
Designation: Heating mat 230V 160W/sqm, 3sqm, o.Therm
Type: R-QN-P-3,0M2/T0
Design: Heating cable
With support mat: Yes
Fixation of the heating conductor: Other
Self-adhesive: Yes
Supply voltage: 207..253 V
Connected load: 0..480 W
Output: 160 W/m²
Heatsealing band load: 11 W/m
Resistance: 110 Ohm
Number of PTC thermistors: 1
Length of PTC thermistors: 5000 mm
Suitable for damp rooms: Yes
Suitable as open space heating: No
Suitable as roof surface heating: No
Area: 3 m²
Length: 6000 mm
Width: 500 mm
Thickness: 3 mm
With controller: No
With room thermostat: No
With floor temperature sensor: No
nVent Thermal heating mat 230V R-QN-P-3,0M2/T0 is designed for floor heating in renovation projects, on stable subfloors, and under tiles, wood, and PVC. It operates at 230 V with an output of 160 W/m² over an area of 3 m², without a thermostat.
