Xyladecor Alpine long-term protection wood stain chestnut

Alpin Long-lasting Wood Stain provides durable weather protection, even in extreme weather conditions.

Product Quality:

• Protects wood from graying – pigments remain color-stable.
• The coating stays beautiful for longer.
• Beautiful surfaces can be easily achieved.
• Satin-gloss and breathable.
• Does not peel – can be easily repainted for renovations.
• Does not drip, even during overhead work.
• Up to 6 years of weather protection, depending on the weather side and construction.

Applications:
For all new and old woods outdoors: facades, doors and windows (including their interiors), garden houses, privacy screens, and much more.

Coverage:
Approximately 12 m² per coat, depending on wood type and absorbency.

How to Stain Properly:
1. Remove thick and flaking, non-load-bearing old coatings. Do not inhale sanding dust! Wear a dust mask. Tie back plants. Do not work in open light or near open flames. Ensure good ventilation.
2. Cover the workspace with foil or paper. Brush or wipe off dust and dirt. Xyladecor Long-lasting Stain is ready to use and only needs to be stirred lightly.
3. For raw, untreated softwoods, we recommend using Xyladecor Wood Protection Primer. This effectively protects the wood from excessive moisture absorption and thus from wood discoloration. The coating will appear more beautiful and even.
4. Apply Xyladecor Alpine Wood Stain undiluted with a soft flat brush in the direction of the wood grain twice. For new woods, multiple coats may be necessary.
5. A uniform surface can also be achieved by reworking with a squeezed brush about 10-20 minutes after application.
6. Stain wood cut edges and end grains three times with Xyladecor Long-lasting Stain. This reduces the leaching of colored ingredients from the wood.
7. Always keep the can well closed after use. Use remaining amounts within one painting season.