SYR System separator STBA 400 DN 15, with tap valve and shut-off valve

For the protection of drinking water from non-drinking water according to DIN EN 1717 up to and including fluid category 4, installation before devices as a withdrawal point, housing made of pressed brass and plastic, minimum operating pressure: 2 bar, maximum operating pressure: 10 bar, maximum operating temperature: 30 °C (inlet) / 65 °C (outlet), medium: drinking water, installation position: any (if drain funnel is at the bottom), ambient temperature 5-40 °C.

Installation note according to § 13 NAV.

Please note that devices with a connection value of 230V will be delivered with either a protective contact plug or a fixed connection (without plug) depending on the power rating. If the device has a fixed connection, a qualified technician must be commissioned for the installation. All devices with a connection value of 400V and above must be operated via a suitable high-voltage connection and may only be connected by a qualified electrician. For devices with a rated power of more than 12KW, approval from your network operator will be required. Please contact the network operator or an installation company registered in the network operator's installer directory before installation. Such an installation company will assist you in obtaining the necessary approval from the respective network operator.