Airfit Internal waste water reducer DN 125x110, for HT/KG pipe, PP

Fire behavior tested according to DIN 4102-B2, EN 13501-1-E, EN 11925-2, tested and approved Z-42.1-366 (DIN EN 1451-1), DN 110 x 40 (eccentric design, without approval), DN 108 x 50 (eccentric design, blue, for inner diameters of 101-103 mm)

Installation instructions according to § 13 NAV

Please note that devices with a connection value of 230V are delivered with either a protective contact plug or a fixed connection (without a plug) depending on the power rating. If the device has a fixed connection, a qualified technician should be commissioned for the installation. All devices with a connection value of 400V and above must be operated via a suitable high-voltage connection and can only be connected by a qualified electrician. For devices with a rated power of more than 12KW, approval from your network operator is required. Please contact the network operator or an installation company registered in the network operator's installer directory before installation. Such an installation company will assist you in obtaining the necessary approval from the respective network operator.