Philips Hue White & Color Ambiance Starter Set
E27, 10 W
Questions about Philips Hue White & Color Ambiance Starter Set
What would you like to know?
0 questions and answers
We are now delivering the 3rd generation.
Helpful answer
Hi, the Philips Hue does not work over wifi. Therefore, it doesn't matter if you have wifi reception on the balcony. The lamp communicates with the bridge via Zigbee. If the connection is not sufficient, the lamp will not turn on. Place the bridge a little closer to your balcony to test whether it works that way. Otherwise you can place another Hue lamp between the router and the balcony. This will then forward the signal to the balcony.
The bridge itself must be connected to the router via the network cable supplied.
According to the specification, a maximum of 50 lamps and 10 accessories are recommended. Unofficially, up to 63 lamps are supported. So 10 are no problem. --> http://www2.meethue.com/en-us/p/hue-bridge/046677458478/specifications
Just look for yourself...
No. According to the data sheet, the system offered here (Switzerland) is only compatible with input voltage 220V-240V.
No, it's 2nd generation (LCT007)
Helpful answer
The lamps are rated for 220-240V.
As far as I can tell the bulbs are 2nd gen too. I have newer ones and they have a different part number.
Yes, that is possible. You can even make corrections from your holiday if you want to refine the settings in a room, for example. Have fun.
3th
Helpful answer
Yes, it's the 3rd one with the gold lettering on the bulbs.
Yes you can. But you have to create a Phillips Hue account.
Helpful answer
so i don't hear any whistling!
As far as I know, this works, but you have to press the light switch twice (1st time power off, 2nd time power on again).
As far as I know, the lamps then return to their original white colour and you have to change the colour again if you have set it differently.
Hello,
I have fitted everything in my flat with them, including the ceiling lamps. The light they provide is also perfectly adequate.
Kind regards
The power of 10W LED is somewhat equivalent to a conventional 60W light bulb. Whereby the beam angle is smaller than that of an incandescent bulb (primarily towards the front).
This is the starter pack with the old revision of the Hue Bridge, if you look at the specifications it also looks like the LED lights are in a slightly older version too. The actual differences should be relatively small.
The biggest change in the Hue Bridge 2.0 is the support of Apple's HomeKit for home automation.
You can most easily tell the difference by looking at the shape: Hue Bridge version 1.0 is round Hue Bridge version 2.0 is square.
you can do this. up to 50 lamps can be operated with one bridge.
21 of 21 questions
