PiL Mimic

A range of LED wall lights for indoor and outdoor use, featuring a housing made of aluminum die-cast with a polyester powder coating. The polyester powder coating, consisting of 13 different layers, protects against UV radiation. Equipped with a silicone seal. The diffuser is made of extra-bright tempered flat glass, with screen printing applied on the inside. The circuit board is equipped with multi-chip LEDs in 4000 K and 3000 K. The optics made of technopolymer lenses provide increased light transmission. The EM. 3P versions can also be used for emergency lighting, with an autonomy of 3 hours. Ni-Cd 3.6 V 4 Ah batteries allow for a burn time of 3 hours in emergency mode and a charging time of 24 hours. The bridging time is 3 hours. Dimmable electronic ballasts (DALI) are available. The DALI versions with dual light output have two converters. The separate switching capability is achieved through the assignment and management of addresses in the DALI protocol. The ambient temperature for the operation of the DALI versions is -40 degrees Celsius. The models with CP optics have an asymmetrical light distribution and are particularly suitable for lighting bike and pedestrian paths. The B versions use two separate ignitions for light emission upwards and downwards.