R&G Vacuum pump P1-N

Membrane vacuum pump and compressor with integrated fine control valve and manometer.

• High performance and long service life due to a voltage-optimized structural membrane
• Unadulterated evacuation, transport, and compression of air
• High performance with minimal dimensions
• Very quiet and low vibration
• High vapor and condensate compatibility
• Cool-running motor, even in continuous operation (> 8000 h)
• With thermal switch and network protection
• Easy to handle, maintenance-free

Application area: For clean evacuation, transport, and compression of air. Very well suited for the vacuum pressing process for the production of composite components. High final vacuum, for molds with an area of about 3–5 m².

Technical data:

• Max. allowable gas and ambient temperature: from +5 to +40 °C
• Motor: 220 V/50 Hz
• Protection class: IP 20
• Motor power: 65 W
• Current consumption: 0.63 A
• Weight: 1.9 kg
• Built-in connection for R&G pump hose Ø 6 mm

Performance ranges:

• Max. delivery rate at atmospheric pressure: 6 liters/min
• Max. vacuum pressure during vacuum pressing: 0.85 bar (pressing pressure = 8500 kg/m²)
• Max. operating overpressure: 2.4 bar

Product made in Germany, two years warranty.

Further information: If the vacuum pumps are operated in an area where the air is not free of dust, such as in a workshop where workpieces are also being ground, we recommend equipping the vacuum pumps with a particle filter. Otherwise, there is a risk that dust or fine chips can accumulate between the membranes in the vacuum pump, significantly reducing the suction power. In such cases, the pump must be sent to the manufacturer for repair. Often, new membranes will need to be installed.