Lanitz 25-037-002 Klebefolie Orastick L x B 2 m 60 cm Perlmutt-Gold-Gelb

Orastick® Pearl is a self-adhesive covering film in elegantly shimmering pearl colors, ideal for creative designs with a special touch. Orastick® can be ironed and blow-dried. The properties of Oracover® and Orastick® are identical, and they can also be used interchangeably. The fundamental difference lies in the adhesive layer: Oracover® is equipped with a heat-activated adhesive, while Orastick® features a self-adhesive bonding agent.

Our tip: Unstable wood fibers can become unstable and tear under stress. Wrinkling and, in the worst case, complete detachment of the fabric are the consequences. For optimal pre-treatment of your wooden surface, we recommend coating the areas to be ironed with the Orastick® adhesive. The Orastick® adhesive penetrates the wood and bonds the loose wood fibers in the core wood, allowing for excellent 3-D adhesion of the Orastick® film to the substrate. With the Orastick® adhesive, no further pre-treatment of the wood is necessary.

Application of the Orastick® adhesive:
1. Sand your wood thoroughly and remove the sanding dust.
2. Stir the contents of the can well.
3. Apply the Orastick® adhesive 1-2 times thinly and evenly using a brush.
4. Allow the adhesive to dry overnight, but for at least 10 hours. (Please do not sand again.)
5. Cover or stick your model as usual with the Orastick® adhesive film.

Coverage: approximately 1 can / 1 m². Not suitable for substrates that are not resistant to organic solvents. Orastick® special thinner: If our adhesives in opened cans dry out slightly, the adhesive can be adjusted back to brush viscosity with the appropriate thinner.