Humbrol No 34 White Matt

Application
A solvent-based, quick-drying paint designed for use on plastic model kits, but can also be used on other substrates. Matt, satin, gloss, metallic, metalcote and clear finishes are available (finish varies by colour).

Substrate
A variety of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always test on a small test area first for suitability).

Coverage
One 14ml can covers approximately 0.3m², depending on film thickness.

Application
Apply directly from the can with a brush. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual dilution ratio is 2 parts paint to 1 part thinner. Note that Metalcote paints are intended for polishing when they are completely dry.

Drying time
Gloss: 1-2 hours
Matt & Satin: 20-40 minutes dust dry, up to 24 hours for through dry
Metallics: fully dry after approximately 10 days. Drying times vary depending on ambient temperature and humidity. Recoatable: at least 6 hours (preferably overnight).

Cleaning instructions:
Brushes: use Humbrol Enamel Thinners
Airbrush: rinse thoroughly with Humbrol Enamel Thinners. The product is permanent after drying.