Best selling Sanitary installation accessories from Jumo

This page always stays fresh and updates automatically.

1. Jumo 54846

Jumo Thermoelement 00054846

Manufacturer: Jumo
Designation: Thermoelement 15x500 -200- +1200°C
Type: 00054846
For gas and oil burners: no
Suitable for other
applications: yes
Length: 50 cm
Sensor class: Class 2
Temperature: -200..1200 °C
With protection tube: yes

The insertable thermoelement is suitable for temperature measurement in gaseous media using the Seebeck effect. The detached protection tube is made of ceramic material (KER 610) (operating temperature up to +1300 °C). Therefore, the thermoelement can be excellently used in heating, furnace, and apparatus construction. The single thermoelement 1x NiCr-Ni K according to DIN EN 60584 (Class 2) is designed for temperatures from -200 to +1200 °C. The connection head in design A is made of aluminum die-cast. It features a cable gland M20 x 1.5 and can withstand ambient temperatures from -40 to +100 °C. The protection tube has dimensions of 15 x 500 mm. A stop flange (DIN 43734) serves as the process connection.
 

2. Jumo Protective sleeve

Jumo Protection Sleeve 60694015

Manufacturer: Jumo
Description: Protection Sleeve
Installation Length: 300 mm
Type: 60694015
Version: Single
Material
of Immersion Tube: Stainless Steel
Material Quality: Stainless Steel 316 Ti (1.4571)
Pressure Rating of Item: Other
Nominal Diameter of Connection: 1/2 inch (15)
Inner Diameter: 6.5 mm
Outer Diameter: 8 mm
Insertion Length: 300 mm
Suitable for Mano-Thermometers: No

The screw-in protection sleeve made of stainless steel (Material No. 1.4571) is suitable for a sensor with a diameter of 6 mm. The sleeve is mounted with a G 1/2 thread type A according to DIN 3852/2. The maximum pressure resistance at a temperature of 150 °C is 88 bar.
 

3. Jumo 902520/10-807-1003-1

Jumo Resistance Thermometer 00065717

Manufacturer: Jumo
Designation: Resistance Thermometer
Output: 4 to 20 mA
Type: 00065717
Design: Terminal
Measuring
Range: 0 to 60 °C
Material: Plastic

The screw-mounted resistance thermometer allows for temperature measurements in many indoor areas of climate technology, due to the temperature dependence of the electrical resistance of its built-in platinum sensor and the special housing design. The housing, with an IP20 protection rating, is made of PC plastic and is designed for temperatures ranging from -30 to +80 °C. Therefore, the resistance thermometer is preferably used for temperature measurements in dry rooms. The resistance thermometer complies with DIN EN 60751 (Class B) and is designed as 1 x Pt100 in a two-wire configuration. The built-in analog transmitter provides a standardized signal of 4 to 20 mA for the measuring range of 0 to 60 °C.
 

4. Jumo Einschraub-Schutzhülse 909710/10-848-8-100-104-26/000

Jumo screw-in protective sleeve 00489140

Manufacturer: Jumo
Designation: Screw-in protective sleeve 76mm, insertion length
Type: 00489140
Design: Single

Material immersion tube: Stainless steel
Material grade: Stainless steel 316 Ti (1.4571)
Connection: Internal thread gas cylindrical (BSPP)
Nominal diameter connection: Other
Internal diameter: 6.2 mm
External diameter: 8 mm
Insertion length: 100 mm
Pressure stage flange: Other
Suitable for manothermometers: No

The cylindrical screw-in protective sleeve is used for the installation of thermocouples and resistance thermometers when, for example, a sensor exchange without system drainage and/or pressure resistance is required. The thermowell with internal thread G 1/2 (similar to DIN 16179 Form D) is designed for temperatures from 0 to 400 °C. The outer diameter of the thermowell is 8 mm. A G 1/2 screw connection serves as the process connection. The inside diameter and installation length are 6.2 x 100 mm. The dimensions given refer to the thermometers. Stainless steel 1.4571 is used as the thermowell material.
 

5. Jumo OHM TEMP 6 100 - Temperature sensor PT100 -50...+200°C (00600899)

Jumo Resistance Thermometer 00600899

Manufacturer: Jumo
Designation: Resistance Thermometer G1/2, -50 to +200 °C
Type: 00600899
Design: Clamp
Measuring
Range: -50 to 200 °C
Material: Stainless Steel
Probe Length: 100 mm

The screw-in resistance thermometer with a Pg9 connection box according to DIN EN 175301-803 (DIN 43650) enables temperature measurement in gaseous and liquid media due to the temperature dependence of the electrical resistance of its built-in platinum sensor. This design is preferred for use in engines and compressors, as well as in plant and shipbuilding, due to the securely locked connector between the protective fitting and connection cable, its shock-resistant construction, and the possibility of measurements under pressure.

The resistance thermometer with a measuring element 1x Pt100 in two-wire configuration according to DIN EN 60751 (tolerance class B) is designed for temperatures from -50 to +200 °C. The protective fitting is made of stainless steel 1.4571 and features a process connection with a G 1/2 inch thread. The protective tube has dimensions of 6 x 100 mm and is tapered to 3.3 mm at the tip. The connector between the protective fitting and connection cable has an ingress protection rating of IP65 when connected.
 

6. Jumo 902150/10-730-1003-1

Jumo Resistance Thermometer 00492539

Manufacturer: Jumo
Description: Resistance thermometer 6x60mm, -5 to +105°C
Type: 00492539
Design: Probe
Measuring
range: -5 to 105 °C
Material: stainless steel
Probe length: 60 mm
Connection cable length: 2.5 m

The plug-in resistance thermometer with connection cable allows for temperature measurement in gaseous and liquid media due to the temperature dependence of the electrical resistance of its built-in platinum sensor. The one-piece protective tube is welded, made of material 1.4571, and has dimensions of 6 x 60 mm.

The resistance thermometer is excellent for applications in climate and refrigeration technology, heating, oven and apparatus construction, as well as laboratory technology. The resistance thermometer complies with DIN EN 60751 (Class B) and is designed as 1 x Pt100 in a two-wire configuration for temperatures ranging from -5 to +105 °C.

The 2.5 m long connection cable made of PUR is mounted with strain relief at the transition and is waterproof with protection class IP65. The permissible ambient temperature of the connection cable is -5 to +105 °C. The open connection end is equipped with ferrules according to DIN 46228 Part 4.
 

7. Jumo Process fitting

Jumo Process Instrument 00302474

Manufacturer: Jumo
Description: Stainless steel process instrument
Type: 00302474
Accessory/Spare part type: Protective cover

Accessory: yes
Spare part: no

The stainless steel instrument (1.4571) can be equipped with a measuring sensor with a Pg13.5 thread and an installation length of 120 mm. The process instrument features a G 3/4A threaded connection as the process connection and also has an installation length of 120 mm.
 

8. Jumo 60003206

Jumo Protection Sleeve Set 60003206

Manufacturer: Jumo
Description: Protection Sleeve Set
Installation Length: 150 mm
Type: 60003206
Design: Double
Material
of the Immersion Tube: Stainless Steel
Material Grade: Stainless Steel 316 Ti (1.4571)
Pressure Rating of the Item: PN 40
Nominal Diameter of Connection: 1/2 inch (15)
Inner Diameter: 13.5 mm
Outer Diameter: 15 mm
Insertion Length: 150 mm
Suitable for Mano-Thermometers: No

The protection sleeve set consists of a screw-in protection sleeve, a strain relief for remote line installation, as well as a mounting plate and a screw for attachment to the lower housing of a panel-mounted thermostat. The protection sleeve is made of stainless steel (Material No. 1.4571) and has an outer diameter of 15 mm. The sleeve is mounted with a G 1/2 thread type A according to DIN 3852/2. The maximum permissible pressure load at a temperature of 150 °C is 48 bar.
 

9. Jumo 902150/10-402-1003-1

Jumo Resistance Thermometer 00085311

Manufacturer: Jumo
Designation: Resistance thermometer 6x50mm, -50 to +400°C
Type: 00085311
Design: Clamp
Measuring
range: -50 to 400 °C
Material: Stainless steel
Probe length: 50 mm
Connection cable length: 1.5 m

The plug-in resistance thermometer with connection cable allows for temperature measurement in gaseous and liquid media due to the temperature dependence of the electrical resistance of its built-in platinum sensor. The one-piece protective tube is welded, made from material 1.4571, and has dimensions of 6 x 50 mm. Therefore, the resistance thermometer is ideally suited for applications in climate and refrigeration technology, heating, oven and apparatus construction, as well as laboratory technology.

The resistance thermometer according to DIN EN 60751 (Class B) is designed as 1 x Pt100 in two-wire configuration and is rated for temperatures from -50 to +400 °C. The 1.5 m long connection cable made of metal mesh is shielded, contacted, and mounted with strain relief at the transition. The permissible ambient temperature of the connection cable is -50 to +350 °C. The open connection end is equipped with wire end sleeves according to DIN 46228 Part 4.
 

10. Jumo Protective sleeve set

Jumo Protection Sleeve Set 60003172

Manufacturer: Jumo
Description: Protection Sleeve Set
Installation Length: 100 mm
Type: 60003172
Design: Single
Material
of Immersion Tube: Stainless Steel
Material Quality: Stainless Steel 321 (1.4541)
Pressure Level of Item: Other
Nominal Diameter of Connection: 1/2 inch (15)
Inner Diameter: 6.5 mm
Outer Diameter: 8 mm
Insertion Length: 100 mm
Suitable for Mano-Thermometers: No

The protection sleeve set consists of a screw-in protection sleeve, a strain relief for remote connection installation, as well as a mounting plate and a screw for attachment to the housing base of a surface-mounted thermostat. The protection sleeve is made of stainless steel (Material No. 1.4571) and has an outer diameter of 8 mm. The sleeve is mounted with a thread G 1/2 Form A according to DIN 3852/2. The maximum allowable pressure resistance at a temperature of 150 °C is 88 bar.
 

Product order
See all products