Best selling Multimeters from Megger
On this page you'll find a ranking of the best Megger products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Megger Voltage Detector AC/DC TPT420
The TPT420 is extremely versatile - it is equipped with both LCD and LED displays and offers AC and DC voltage measurements from 12 to 1000 V AC and up to 1500 V DC. Additionally, it includes a continuity function in the range of 0 to 500 kΩ. An audible signal provides extra safety during continuity and voltage measurements. A built-in bright LED flashlight makes it easier for the operator to work in low-light conditions. The TPT420 operates below the tripping threshold to avoid unintentionally triggering the RCD/ELCB when testing between phase and earth. The previously common crossing of test probes is unnecessary with the TPT to indicate the direction of the rotating field. Furthermore, it can also perform a single-pole voltage display test. For your safety, the TPT420 complies with the CAT IV 1000 V standard and is housed in an IP64 enclosure. It meets the current standards IEC/EN 61243-3 and DIN VDE 0682-401. To comply with regulations, GS38 test probe covers and a protective storage and transport bag are included as standard.
2. Megger DET3TC Earth meter, earth resistance
The new DET3 series grounding measurement devices from Megger offer unique solutions for your grounding measurements. The complete kit, which includes the measuring device, test leads, and stakes, is delivered in a robust hard case – everything you need for your measurements. The housing of the grounding measurement device has an IP54 protection rating, making it suitable for outdoor use. The device is designed to be user-friendly: a large selector switch makes it easy to choose between 2- or 3-wire grounding measurements. With its large and easy-to-read LCD display and a big start button, the device is particularly well-suited for outdoor grounding measurement requirements. The devices automatically check probe and auxiliary ground resistance and display the status on the LCD screen. Additionally, the device includes a voltmeter for measuring ground voltage, with a maximum measurement voltage that can be set to 25 or 50 V. With the DET3TC grounding measurement device, a selective grounding measurement (ART) can be performed using the optional current clamp, allowing for the testing of individual grounds without disconnecting them, thus keeping the grounding system intact during measurement.
3. Megger Alternating voltage detector for hazardous areas
The VF6 EX also features a bright white LED flashlight, which is an advantage when used in low-light conditions. The product is EX-certified for use on gas platforms and in other petrochemical environments. It is suitable for identifying live conductors, locating a break in a conductor, checking a blown fuse in a circuit, as well as detecting alternating current at outlets, switches, circuit breakers, fuses, cables, and lights.
4. Megger Current clamp power clamp
The design meets the requirements of BSEN 61010-1 CAT IV 600 V for supply side applications. A large backlit LCD display clearly shows all measurements, which can be activated at the push of a button or by turning the selection knob. It also automatically shuts off to reduce battery consumption. The DPM1000 can measure DC, AC, pulsed, and mixed currents up to 1000 A simply by clamping the probe around the corresponding conductor, while voltages up to 1000 V AC or DC can be measured with the included test leads. When power measurements are to be taken, both of the above methods are performed simultaneously. All energy-related parameters, including energy consumption, frequency, total harmonic distortion, distortion factor, and capacity, are captured. It features automatic range selection and a phase rotation direction indicator for 3 phases. The DPM1000 measures single-phase and three-phase active power and power factor, the harmonic content of the signal, and can display harmonics up to the 25th harmonic. Temperature measurements up to 1000 °C can be performed using the supplied thermocouple. The DCM1000 is ideally suited for measuring power quality and applications in the development, installation, maintenance, and repair of equipment and devices in power electronics and energy technology. The unit has a built-in flashlight that illuminates during clamp operation and an automatic non-contact voltage detection feature for identifying live wires. The DPM 1000 can be used for data logging in its internal non-volatile memory. You can record up to 9999 measurements/records in memory over a specified period and download the data to create charts and reports. The recording rate can be set from 1 second to 600 seconds.
5. Megger MIT330 Insulation measuring device 250 V, 500 V, 1000V 999 MΩ
Digital or analog: The Megger MIT300, MIT310, and MIT320 all feature the popular Megger digital/analog display. Large 20 mm high characters provide a very clear reading, combined with an analog scale for the feel of an analog instrument, with a true analog response. Resistance measurement range from 10 Ω to 1 MΩ, storage of 1000 test results, adjustable buzzer from 1 to 20 Ω.
Multimeter
CHF1084.95
Megger MIT330 Insulation measuring device 250 V, 500 V, 1000V 999 MΩ
CAT III 600V
6. Megger Cable metre 1005-022 TDR2050
The TDR2050 device from Megger is state-of-the-art: a two-channel, high-resolution, compact time-domain reflectometer with a color display for locating faults on paired metal cables. It has a minimum resolution of 0.1 m / 0.9 m and a maximum range of 20 km, depending on the selected velocity factor and cable type. Various output impedances are available (25, 50, 75, 100, 140 Ohm + AUTO), and a key feature is the automatic impedance matching. The velocity factor can be set between 0.2 and 0.99 to meet all cable testing requirements.
7. Megger MIT300 Insulation measuring device 250 V, 500V 999 MΩ
Digital or analog: The Megger MIT300, MIT310, and MIT320 all feature the popular Megger digital/analog display. Large 20 mm high characters provide a very clear reading, combined with an analog arc for the feel of an analog instrument, with a genuine analog response.
8. Megger MIT481/2
The insulation and continuity testers of the MIT480 mk2 series replace the original MIT480 range and have been specifically designed for the telecommunications and cable testing markets. The new devices feature a redesigned housing, a stand, and a 6-cell battery compartment with separate access to the fuses. All devices are encapsulated for enhanced protection and achieve an IP54 rating.
9. Megger MIT310 Insulation measuring device 250 V, 500 V, 1000V 999 MΩ
Digital or analog: The Megger MIT300, MIT310, and MIT320 all feature the popular Megger digital/analog display. Large 20 mm high characters provide a very clear reading, combined with an analog scale for the feel of an analog instrument, offering a genuine analog response.
Multimeter
CHF804.95
Megger MIT310 Insulation measuring device 250 V, 500 V, 1000V 999 MΩ
CAT III 600V
10. Megger EVCA210 EV adapter
The EVCA210 has been specifically designed to meet European and other international standards. It can be used with all single-phase and three-phase electric vehicle charging stations equipped with the appropriate connectors. It is intended to test the functionality and safety of a charging station. With the adapters, you can conduct tests using suitable single or multifunction measuring devices at EV charging stations in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. Charging stations should be tested during initial installation and regularly checked thereafter.
