Spray.Bike Bicycle Paint Spray Pop

Spray.Bike is a bicycle paint spray with innovative powder coating developed for both beginners and experienced painters.

Spray.Bike is a dry powder coating developed exclusively for bicycles. The acrylic mixture contains dry particles that form a highly opaque layer around the frame of your bike.

The innovative acrylic formula makes Spray.Bike perfect for customising, repairing and restoring your bike. Make sure the surface is clean and dry. Wear protective gloves, clothing, eye and face protection. Always paint in an open space outdoors. Shake can for at least 3 minutes before use. Test spray for 2-3 seconds before application.

Optimum temperature for spraying: 20-25°C. Always spray with the can in a vertical position, otherwise the paint may spray unevenly. Solid colours: Spray the surface from a distance of 30 cm. Always keep your hand moving when spraying. Let dry for about 10 minutes and repeat the process a second time.

At the end, turn the can upside down and spray for two seconds before storing. Protect the can from sunlight and temperatures above 50°C. For a satin or gloss top coat, finish with Spray.Bike Frame Builder's Transparent Finish - Satin/Gloss. For a matt top coat, paint with Frame Builder's Transparent Finish - Matte.

Physical properties:

Butane/propane mixture
Density: 0.6-0.8 g/L (density cup 100cm3/20oC, ASTM D - 1475)
Flash point: -104 oC (based on the blowing agent)
Drying time: Contact (20°C, humidity<65%): 5-10min
Through-drying (20°C, humidity <65%) : 1h
Maximum hardness: 24 hours
Coverage: 4m2 per 400ml
Coating thickness: 200m (wet), 50-100m (dry)
Can pressure: 4 bar (20oC), 8 bar (50oC)
Contents: 400ml/340g (net)
Shelf life: at least 5 years
VOC content: 640 g/L.