Pferd Grinding sleeve GSB-A 15x10mm gr.80 corundum cylindrical Max. revolutions 36000 min-¹

Corundum A · Cylinder shape · Grinding belts are used in series production, for finishing, and in assembly. The base is made of tear-resistant, fully resin-bonded material. Good grain adhesion ensures a long service life. The addition of grease or grinding oil is recommended, especially for light metal processing. Recommended peripheral speed Vc = approx. 20 - 30 m/sec.

Further technical properties:
· Drive type: Flex shaft drive, straight grinder
· Application recommendation: For easy changing of the grinding sleeves, slide them on and off with a slight right twist. Keep the grinding sleeve holder clamped in the tool drive. To ensure a secure fit of the grinding sleeve, adhere to the minimum speed of the grinding sleeve holder. For best performance, use at a recommended cutting speed of 20-30 m/s. Use suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools.
· Processable materials: Hardened, tempered steels over 1,200 N/mm² (54 HRC)
· Processing tasks: Deburring, stepwise fine grinding, leveling, sharpening, weld seam processing, roughening, surface processing, edge processing
· Ordering notes: Please order the grinding sleeve holder separately.
· Ø Inner: 15 mm
· RPM, optimal, up to: 36,000 RPM
· RPM, optimal, from: 26,000 RPM
· Safety notes: The maximum permissible peripheral speed is 30 m/s. The specified maximum permissible speed must never be exceeded for safety reasons. Do not allow grinding sleeves to protrude beyond the grinding sleeve holder.
· Advantages: Highest cost-effectiveness due to particularly high material removal and high aggressiveness of the abrasive. Outstanding service life due to a special manufacturing process – even under the toughest operating conditions. Secure fit of the grinding sleeve on the grinding sleeve holder due to the expansion of the holder during use.

Contents: 100 pieces per carton.