Devi Thin-bed heating mats DTIR 83-030570 150W/sqm 3.0 sqm 50x600 self-adhesive

Danfoss Thin Bed Heating Mat DTIR 6m

Manufacturer: Danfoss
Designation: Thin Bed Heating Mat 150W/m²
Type: DTIR 6m
Design: Heating Film
With Carrier Mat: Yes
Fixation of Heating Cable: Glued
Self-Adhesive: Yes
Connection Power: 450 W
Power: 11 W/m²
Heating Cable Load: 11 W/m
Number of Cold Leads: 1
Length of Cold Leads: 4000 mm
Suitable for Wet Rooms: Yes
Suitable as Outdoor Heating: No
Suitable as Roof Heating: No
Area: 3 m²
Length: 6000 mm
Width: 500 mm
Thickness: 4 mm
With Controller: Yes
With Room Thermostat: No
With Floor Temperature Sensor: No

The self-adhesive thin bed heating mat with a connection lead is pre-assembled for easy installation and has been specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 4.0 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large spaces, as there is no need to return the second connection.

The heating cable, with additional protective sheathing for the use of RCD protection, is applied to a plastic mesh. The length of the connection lead is 4.0 m. Cold lead: 4 m, 1.0 mm², Voltage: 230 V, Rated Limit Temperature: 90 °C, Specific Heating Power: 150 W/m², Length Load: 11 W, Insulation: PVC / FEP, Resistance Tolerance: +10% / -5%, Minimum Installation Temperature: 5 °C, Minimum Bending Radius: 6 x dA, Protection Class: IPX7, Approval: EN 60335-2-96, Mat Height: 4.0 mm, Calculation Width: 50 cm, Delivery Width: 48 cm, Area: 3.0 m², 0.5 x 6.0 m, Power: 450 W.