Devi Thin-bed heating mat DTIR 83-030562 150W/sqm 1.0 sqm 50x200 self-adhesive

Danfoss Thin Bed Heating Mat DTIR 2m

Manufacturer: Danfoss
Description: Thin bed heating mat 150W/m²
Type: DTIR 2m
Design: Heating foil
With carrier mat: yes
Heating conductor fixation: glued
Self-adhesive: yes
Connection power: 150 W
Power: 11 W/m²
Heating conductor load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 1 m²
Length: 2000 mm
Width: 500 mm
Thickness: 4 mm
With controller: yes
With room thermostat: no
With floor temperature sensor: no

Danfoss Thin Bed Heating Mat DTIR 2m: additional details
The self-adhesive thin bed heating mat with a connection lead is pre-assembled and designed specifically for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 4.0 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as there is no need to return the second connection. The heating cable with additional protective sheath for use with RCD protection is applied to a plastic mesh. The length of the connection lead is 4.0 m.

Cold lead: 4 m, 1.0 mm²
Voltage: 230 V
Rated limit temperature: 90 °C
Specific heating output: 150 W/m²
Length load: 11 W
Insulation: PVC / FEP
Resistance tolerance: +10% / -5%
Minimum installation temperature: 5 °C
Minimum bending radius: 6 x dA
Protection class: IPX7
Approval: EN 60335-2-96
Mat height: 4.0 mm
Calculation width: 50 cm
Delivery width: 48 cm
Area: 1.0 m²
0.5 x 2.0 m
Power: 150 W
EAN: 5703466169339.