Devi Heating mat

Danfoss Heating Mat DTCE-300 1050W #23

Manufacturer: Danfoss
Description: Heating mat 400V
Type: DTCE-300 1050W #23
With carrier mat: no
Heating conductor fixation: glued
Self-adhesive: no
Connection power: 1050 W
Power: 300 W/m²
Heating conductor load: 30 W/m
Number of cold conductors: 1
Length of cold conductor: 10000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: yes
Suitable as roof heating: no
Area: 3.5 m²
Length: 7000 mm
Width: 500 mm
Thickness: 7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

Danfoss Heating Mat DTCE-300 1050W #23: additional details
Ready-to-install heating mat with a connection cable suitable for installation in reinforced concrete, screed, or sand bed. With additional protective sheathing for the use of RCD protection. This heating mat system is particularly suitable for installation in angled and/or large areas, as the return of the second connection is not required. Including factory-mounted waterproof connectors and a 10 m long cold conductor, to be installed according to the installation instructions. Measurement of insulation and total resistances. Heating cable according to IEC 60800, voltage: 400 V, rated limit temperature: 80°C, specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area 3.5 m², 1050 W.