Decotric Decofill ready-mixed filler

Application Area:

Decofill Ready-Mixed Filler for Interiors is excellent for repairing, smoothing, and coating uneven, rough surfaces, as well as for securely filling precast concrete elements, textured plaster surfaces, and indoor areas. Decofill Ready-Mixed Filler for Interiors is particularly stable and ideal for leveling over fiberglass mesh. It can be used on all mineral substrates (plaster, concrete, brick, etc.), dispersion paints, and gypsum boards. Not suitable for filling on wood, metal, glass, and plastic.

Technical Data:

• Raw material base: synthetic resin dispersion, fillers, additives, methylcellulose
• Density: approx. 1.73 g/cm³
• pH value: 8.5
• Consumption: approx. 1.7 kg/m² at 1 mm layer thickness
• Drying time: 4 - 7 hours, depending on layer thickness, substrate absorbency, and ambient temperature
• GISBAU product code: M-DF01

Substrate Preparation:
The substrate must be dry, load-bearing, and free from separating agents (dust, form oil, etc.). Old wallpapers, poorly adhering paints, and loose plaster spots must be removed. Deep holes and breaks should be filled with Pre-filler Decomur Super-Adhesion Filler or Decofill Inside. Highly absorbent, sandy, or chalky substrates must be primed with Decotric Deep Primer LF.

Application:
Apply Decofill ready-to-use filler for interiors up to a maximum layer thickness of 5 mm. Uneven areas can be smoothed or sanded while still wet. Subsequent coatings and adhesions should only occur once the filled area is completely dry. Before coating with synthetic resin plasters, prime the filled area with Decotric Deep Primer LF. Do not use below +5° Celsius substrate and room temperature. Clean tools immediately after use with water.

Storage:
Store in a cool, frost-free place. Keep the container tightly closed.