Best Fox products in the Bike fork category

On this page you'll find a ranking of the best Fox products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Fox K Float

New crown and revised housing. The new design is 20 grams lighter, while the overlap of the fork steerer at the crown has been increased. This improves durability while maintaining stiffness and reducing weight. By increasing the air volume in the lower housing, the amount of unwanted pressure spikes is reduced. The oil also circulates in the upper part of the housing, continuously lubricating the foam rings and bushings as the fork compresses and extends. Bleed valves at the lower housing allow for atmospheric pressure equalization for better fork performance, enabling full travel utilization and improving sensitivity and responsiveness over small bumps. Float Evol optimizes sensitivity over small bumps by increasing the negative air spring volume. The linear spring curve provides a pleasant ride feel in the upper range, additional support in the mid-stroke, and a better-tunable end progression. The Grip2 damper sets the standard for unmatched ride quality and ultra-precise adjustability. Grip2 features patented Variable Valve Control (VVC) technology, allowing for external fine-tuning of suspension performance. Grip2 achieves what usually requires disassembly and reassembly of the fork with just a few clicks. Function: Adjustable compression stage suspension fork. Axle type: QR thru-axle. Axle diameter (mm): 15 mm. Travel (mm): 160 mm. Axle spacing: 110 mm. Steerer tube diameter (inches): 1 1/8 -> 1.5 (tapered) inches. Spring system type: Oil / Air brake mount. Brake type: Disc (Post Mount). 

Fox K Float (160 mm, Air)
Bike fork
−10%
Returned & Tested
CHF495.– currently CHF550.– new

Fox K Float

160 mm, Air

2. Fox 38 A Float 27.5" P-S 170mm Grip 3Pos

The Fox Racing Shox 38 A Float 27.5" P-S 170mm Grip 3Pos is a highly advanced bike fork specifically designed for demanding enduro racing conditions. With an extremely strong chassis, this fork offers remarkable stiffness that is 31% higher than the 36 model, ensuring improved performance under lateral forces. The innovative design features an elliptical steerer tube that allows for high stiffness with minimal weight. This fork is equipped with a new pressure equalization system that optimizes suspension efficiency. The combination of air and oil channels in the lower leg unit provides consistent damping and enhanced ride quality. The 38 A Float is ideal for mountain bikes, offering a travel of 170 mm, making it an excellent choice for riders seeking both performance and control.

- 31% higher stiffness under lateral forces compared to the 36 model
- 9% higher braking stiffness and 20% more torsional stiffness
- Elliptical steerer tube for high stiffness with minimal weight
- New pressure equalization system for optimized suspension efficiency
- Lockout function via handlebar for improved control.
 

Fox 38 A Float 27.5" P-S 170mm Grip 3Pos (170 mm, Air)
Bike fork
CHF550.–

Fox 38 A Float 27.5" P-S 170mm Grip 3Pos

170 mm, Air

3. Fox 16 Axle Assembly 16 15QRx110 Factory & Performance black ano

The 16 Axle Assembly from Fox Racing Shox is a high-quality thru-axle specifically designed for bike forks. With a diameter of 15 millimeters and a length of 110 millimeters, it provides an optimal fit and stability for various bike models. The fork steerer has a diameter of 1.5 inches, ensuring compatibility with a wide range of forks. The axle features a sleek black anodized finish that is not only aesthetically pleasing but also offers additional protection against corrosion and wear. Made in Taiwan, this product meets the high-quality standards of Fox Racing Shox and is suitable for both recreational use and performance-oriented applications. The 16 Axle Assembly is a reliable choice for cyclists who value performance and durability. 

Fox 16 Axle Assembly 16 15QRx110 Factory & Performance black ano
Bike fork
CHF98.20

Fox 16 Axle Assembly 16 15QRx110 Factory & Performance black ano

4. Fox Remote Topcap Interface

The Remote Topcap Interface from Fox Racing Shox is an innovative accessory for mountain bike forks that provides an easy and efficient way to install a locking system on the handlebars. This kit is specifically designed for forks with the FIT4 cartridge manufactured after 2016. Weighing only 14 grams, it is lightweight and does not add to the overall weight of the bike. The installation of the Remote Topcap Interface allows riders to conveniently lock the fork from the handlebars, offering improved control and adaptability during rides. This product is ideal for mountain bike enthusiasts who value performance and user-friendliness.

- Compatible with Fox Racing Shox forks with FIT4 cartridge from 2016 onwards
- Allows locking of the fork directly from the handlebars
- Lightweight design at just 14 grams for optimal handling.
 

Fox Remote Topcap Interface
Bike fork
CHF51.–

Fox Remote Topcap Interface

5. Fox 38 K Float 27.5" F-S 170mm Grip 2 HSC LSC HSR LSR

The Fox Racing Shox 38 K Float 27.5" F-S 170mm Grip 2 HSC LSC HSR LSR is a highly advanced mountain bike fork designed specifically for mountain biking. This award-winning enduro fork combines innovative technologies to deliver outstanding ride quality and adaptability. With a redesigned crown design, it allows for more space in the steerer tube area, which is particularly beneficial for shorter rakes. The elliptical steerer tube in the crown provides high stiffness while keeping the weight to a minimum, and the high-quality Kashima coating enhances the fork's durability and performance. An optional mudguard with a stable 4-point direct mount protects the stanchions and seals from dirt, making maintenance easier and extending the fork's lifespan.

- Redesigned crown design for improved space in the steerer tube area
- Elliptical steerer tube for high stiffness at low weight
- High-quality Kashima coating for enhanced durability
- Lockable suspension via the handlebar for greater control
- Optional mudguard with stable 4-point direct mount.
 

Fox 38 K Float 27.5" F-S 170mm Grip 2 HSC LSC HSR LSR (170 mm, Air)
Bike fork
CHF714.–

Fox 38 K Float 27.5" F-S 170mm Grip 2 HSC LSC HSR LSR

170 mm, Air

6. Fox 38 K Float 27.5" F-S E-Tuned 170mm Grip 2 HSC LSC HSR LSR

The award-winning Enduro fork incorporates numerous new technologies. The result is an unmatched combination of ride quality, adjustability, stiffness, and consistent weight. Redesigned crown design for more space in the steerer tube area; a significant advantage for shorter rakes. Adjusted crown diameter for a visually smooth transition between bulky steerer tubes and fork crown. Completely redesigned stanchion unit, optimizing stiffness and weight. Optional mudguard with a stable 4-point direct attachment protects the stanchions and seals from dirt. 

Fox 38 K Float 27.5" F-S E-Tuned 170mm Grip 2 HSC LSC HSR LSR (170 mm, Air)
Bike fork
CHF686.–

Fox 38 K Float 27.5" F-S E-Tuned 170mm Grip 2 HSC LSC HSR LSR

170 mm, Air

7. Fox 36 K Float 29" F-S 160mm Grip 2 HSC LSC HSR LSR

New crown and revised housing. The new design is 20 grams lighter, while the overlap of the fork steerer at the crown has been increased. This improves durability while maintaining stiffness and reducing weight. By increasing the air volume in the lower housing, the amount of unwanted pressure spikes is reduced. The oil also circulates in the upper part of the housing, continuously lubricating the foam rings and bushings as the fork compresses and extends. Bleed valves on the lower housing allow for atmospheric pressure equalization for better fork performance, enabling full travel utilization and improving sensitivity and responsiveness over small bumps.

Grip2 Cartridge. The Grip2 damper sets the standard for unmatched ride quality and ultra-precise adjustability. Grip2 features patented Variable Valve Control (VVC) technology, allowing for external tuning of suspension performance. Grip2 achieves what usually requires disassembly and reassembly of the fork with just a few clicks.

Float Evol. Optimizes sensitivity over small bumps by increasing the negative air spring volume. The linear spring curve provides a pleasant ride feel in the upper range, additional support in the mid-stroke, and better-tunable end progression.

Features & Specifications:
• Function: Adjustable compression
• Suspension fork
• Axle type: QR thru-axle
• Axle diameter (mm): 15 mm
• Travel (mm): 160 mm
• Axle installation width: 110 mm
• Wheel size (inches): 27.5+ inches
• Steerer tube diameter (inches): 1 1/8 -> 1.5 (tapered) inches

Spring system:
• Type: Oil / Air

Brake mount:
• Brake type: Disc (Post Mount)

Main information:
• Intended use: MTB.
 

Fox 36 K Float 29" F-S 160mm Grip 2 HSC LSC HSR LSR (160 mm, Air)
Bike fork
CHF824.–

Fox 36 K Float 29" F-S 160mm Grip 2 HSC LSC HSR LSR

160 mm, Air

8. Fox 32 A Float AX 700C P-SE 40mm FIT4 3Pos-Adj

The completely new gravel design was developed with feedback from partners and athletes based on the proven FOX FIT4 or GRIP damper options. It's time to replace your elastomer-suspended stem and un-damped leaf springs with a fully-fledged suspension fork designed 100% for modern gravel biking. From the starting line at Grinduro to the bumpy gravel road in front of your door, the 32 TC is the evolution of gravel.

Features & Specifications:
- Function: Adjustable rebound
- Suspension fork
- Wheel size: 28 inches
- Steerer tube diameter: 1 1/8 to 1.5 inches (tapered)
- Axle type: Thru-axle
- Axle diameter: 12 mm
- Travel: 40 mm
- Axle spacing: 100 mm

Suspension System:
- Type: Oil / Air

Brake Mount:
- Brake type: Disc (International Standard)

Main Information:
- Intended use: Gravel

Details:
- 700c chassis compatible with tires up to a maximum of 50 mm
- Integrated fender mount (maximum 700c x 45 mm with fender)
- Slim fork crown for improved frame compatibility
- Travel-specific FLOAT EVOL air spring
- Compact adjusters with a particularly low profile for more space in the down tube area
- Brake mount: Flat Mount, compatible with 160 - 180 mm brake discs
- Offset: 45 mm.
 

Fox 32 A Float AX 700C P-SE 40mm FIT4 3Pos-Adj (40 mm, Air)
Bike fork
CHF596.–

Fox 32 A Float AX 700C P-SE 40mm FIT4 3Pos-Adj

40 mm, Air

9. Fox 36 K Float 29" F-S 150mm Grip 2 HSC LSC HSR LSR

New crown and revised housing. The new design is 20 grams lighter, while the overlap of the fork steerer at the crown has been increased. This improves durability while maintaining stiffness and reducing weight. By increasing the air volume in the lower housing, the amount of unwanted pressure spikes is reduced. The oil also circulates in the upper part of the housing, continuously lubricating the foam rings and bushings as the fork compresses and extends. Bleed valves on the lower housing allow for atmospheric pressure equalization for better fork performance, enabling full travel utilization and improving sensitivity and responsiveness over small bumps.

Grip2 Cartridge. The Grip2 damper sets the standard for unmatched ride quality and ultra-precise adjustability. Grip2 features patented Variable Valve Control (VVC) technology, allowing for external fine-tuning of suspension performance. Grip2 achieves in just a few clicks what usually requires disassembly and reassembly of the fork.

Float Evol. Optimizes sensitivity over small bumps by increasing the negative air spring volume. The linear spring curve provides a pleasant ride feel in the upper range, additional support in the mid-stroke, and a better-tunable end progression.

Features & Specifications:
• Function: Adjustable compression
• Suspension fork
• Axle type: QR thru-axle
• Axle diameter (mm): 15 mm
• Travel (mm): 150 mm
• Axle spacing: 110 mm
• Wheel size (inches): 29+ inches
• Steerer tube diameter (inches): 1 1/8 -> 1.5 (tapered) inches

Spring System:
• Type: Oil / Air

Brake Mount:
• Brake type: Disc (Post Mount)

Main Information:
• Intended use: MTB.
 

Fox 36 K Float 29" F-S 150mm Grip 2 HSC LSC HSR LSR (150 mm, Air)
Bike fork
CHF1369.–

Fox 36 K Float 29" F-S 150mm Grip 2 HSC LSC HSR LSR

150 mm, Air

10. Fox 36 K Float 27.5 Grip2 Fit

The Fox Racing 36 K Float 27.5" Factory Grip2 Tapered Boost. The award-winning 36 receives a significant performance boost with the FIT GRIP2 four-way adjustable damper. Equipped with the patented dual Variable Valve Control (VVC) high-speed and low-speed rebound adjustment, improved compression damping, and overall reduced friction, the 36 offers a new level of performance and adjustability that rivals that of the X2 dampers. The high-speed compression and high-speed rebound are now easily adjustable with 8 clicks. The 36 features a patented thru-axle system that combines the benefits of a thru-axle with the simplicity of a tool-free quick release. This system secures the spacing via a floating sleeve, allowing for repeated removal and installation of the front wheel while ensuring perfect alignment of the fork. The positioning of the swing sleeve is factory preset, so you can simply install the front wheel and ride on if you're unsure how to operate the swing axle system or just prefer not to deal with it. The arch design of the 36 is crafted to perfectly fit modern enduro and downhill bikes. The profiles of the head tubes are getting wider, while the fork offsets are becoming shorter. The new arch shape accommodates this by extending forward to provide ample clearance for the head tube during full compression. 

Fox 36 K Float 27.5 Grip2 Fit (160 mm, Air)
Bike fork
CHF714.–

Fox 36 K Float 27.5 Grip2 Fit

160 mm, Air