
Fox INV Podium Factory Suspension Fork, Grip X2, 170mm, 29", 68HT, black ano/kashima
170 mm, Air
Here’s a ranking of the best selling Bike forks. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
For demanding riders seeking maximum stiffness and control in an exceptional fork, on par with a downhill dual-crown fork! The 47 mm stanchions, a massively reinforced and revolutionary fork crown design, and a 20×110 mm Boost DH steel axle achieve extraordinary bending and torsional stiffness with the Up-Side Down Podium Fork, ensuring maximum tracking on the roughest terrain.
The GlideCore air shaft significantly reduces friction, especially under axial forces, such as when rolling over a large rock or root at high speed. Thanks to its special design, the GlideCore can better absorb such loads, resulting in less misalignment or pressure against the stanchion.
Podium Performance with greater bushing overlap allows for 175 mm of guiding overlap – 32% more than the FOX 38, resulting in minimal friction and continuous lubrication of all seals for optimal performance.
The finely adjustable GRIP X2 damper is specifically designed for the Upside Down chassis. Enhanced compression support and tailored rebound damping enable the best setup for precise suspension tuning for every rider and terrain.
The designed Inverted Design chassis makes riding noticeably more agile, and the carbon fork guards reliably protect against stone impacts and scratches on the Kashima-coated stanchions.

Fox INV Podium Factory Suspension Fork, Grip X2, 170mm, 29", 68HT, black ano/kashima
170 mm, Air
The absolute slimmest, lightest, and stiffest 100mm XC marathon fork on the market! 40% stiffer and nearly 100g lighter than the previous model, the 32 SC. The placement and design of the rear bridge provide a maximum stiffness-to-weight ratio.
The new Grip SL cartridge offers improved performance and linear top performance. The pressure adjustment lever of the Grip SL can be operated more effectively and ergonomically, saving effort.
Bypass channels integrated into the lower fork leg ensure optimal lubrication and allow for a silky-smooth response as well as the best control and traction of the wheel.
Suitable for tire widths up to 2.4 inches and disc brake sizes between 160-180 mm.

The Soma MTB fork is a high-quality bike fork specifically designed for mountain bikes. It is made from durable Tange CrMo steel, known for its longevity and stability. With a steerer tube diameter of 1 1/8 inches and a length of 300 mm, this fork provides a reliable foundation for various bike frames. The fork is suitable for 26-inch bike frames designed for suspension forks with a travel of 80 to 85 mm. The 40 mm offset ensures balanced geometry and improved handling on uneven terrain. The cantilever brake allows for precise braking control, which is essential for safe riding in challenging conditions.
- Made from durable Tange CrMo steel
- Suitable for 26-inch bike frames with 80-85 mm travel
- Steerer tube diameter of 1 1/8 inches
- Compatible with cantilever brake systems.

The F 535 ONE fork takes it a step further with its unique travel-dependent damping that generates different compression damping throughout the entire travel. Experience a new dimension of control, powered by a unique travel-dependent damping system. The F 535 ONE goes even further with its two unique features. Plushport is a travel-dependent damping system driven by a bypass in the oil damper, generating varying levels of compression damping throughout the entire travel. For example, the fork remains high in its travel on steep, technical terrain, providing precise feedback from the ground while absorbing the hardest hits. Coilpair ensures sensitivity to small bumps and an initially low compression damping, allowing the wheel to follow the ground for maximum traction. The combination of both technologies offers a new dimension of control during your all-mountain ride.

Cross Country is continuously evolving. The descents are becoming steeper, the climbs more technical, and artificial obstacles such as rock gardens, berms, and drops are placing significantly higher demands on both rider and equipment. The F 232 ONE has been specifically designed to meet these challenges. Its topologically optimized construction sets new standards in the ratio of stiffness to weight. The internal components have also been specifically developed for Cross Country. The LINEAIR spring characteristic, combined with the three-stage INCONTROL damping, makes the F 232 ONE ready for the hunt, whether for titles or personal bests. The fork is available with an offset of 44 mm or 51 mm, allowing for the selection of the required degree of agility for the bike.

Cross Country is continuously evolving. The descents are getting steeper, the climbs more technical, and artificial obstacles like rock gardens, berms, and drops present significantly higher demands on both rider and equipment. The F 232 ONE has been specifically designed to meet these challenges. Its topology-optimized construction sets new standards in the ratio of stiffness to weight. The internal components have also been specifically developed for Cross Country. The LINEAIR spring curve, combined with the three-stage INCONTROL damping, makes the F 232 ONE ready for the hunt, whether for titles or personal bests. The fork is available with an offset of 44 mm or 51 mm, allowing for the selection of the required level of agility for the bike.

Revised by the fastest racers in the world, for the fastest racers in the world, you want the BoXXer in your corner. The brand new 38mm chassis is equipped with the DebonAir+ twin-tube air spring, making you feel like it's a steel spring. Combined with the Charger 3 RC2 damper, the BoXXer Ultimate brings you straight to the top step of the podium. And with our new height markings, adjusting it is a breeze – no ruler needed.

With larger bicycles come greater demands. Fortunately, RockShox has created the 35 Gold to meet all requirements, both in terms of performance and value. Whether you have an E-MTB or a traditional MTB, the robust 35 Gold is equipped with our proven DebonAir spring and Motion Control damping. New this year is an E-MTB-oriented option featuring mounting points for optional full or short fenders.
• Function: Adjustable rebound
• Intended use: MTB
• Weight: 2259 g
• Details:
- The new E-MTB mounting options with fender mounts are suitable for all e-bikes (1.8" taper available)
- New graphics are easy to read and give a fresh impression
- Motion Control damping with low-speed compression adjustment
- Highly tunable DebonAir spring provides a consistent feel throughout the travel
- Fits tires up to 2.8"
- Quick, black-painted upper 35 mm aluminum tubes combine stiffness and low weight with a premium look
- Min./Max. rotor size: 180/220mm
- Includes fender, star nut & Maxle Stealth thru-axle
- Fork offset: 44mm
Material
• Steerer tube: Aluminum
Suspension fork
• Travel (mm): 160 mm
• Axle width: 110 mm
• Wheel size (inches): 27.5 inches
• Steerer tube diameter (inches): 1 1/8 -> 1.5 (tapered) inches
• Axle type: Thru-axle
• Axle diameter (mm): 15 mm
Spring system
• Type: Oil / Air
Brake mount
• Brake type: Disc (International Standard).

Conquer mountains. Master descents with confidence. The SID Ultimate Flight Attendant is unlike other XC forks. It features an impressive 35mm chassis that holds the line when it matters most. With the Flight Attendant system, this suspension fork is more efficient and modern than ever before. The new electronic Charger Race Day 2 Flight Attendant damping offers three settings for compression: Open, Pedal, and Lock. The SID Ultimate Flight Attendant adapts to everything from full-throttle cross-country to sporty touring, thanks to a new, more voluminous DebonAir+ spring. It is smooth in the upper range of travel and can be adjusted to your preferences.

The Adventure Race Carbon fork by Price is a high-quality component specifically designed for trekking bikes and city bikes. With a steerer tube diameter of 1 1/8 inches and a wheel diameter of 28 inches, this fork offers an optimal fit and stability for various bike models. The use of carbon for the steerer tube and the stanchions not only ensures a lightweight design but also provides high stiffness and durability, enhancing the bike's performance and handling. The fork is elegantly finished in black, seamlessly integrating into the design of modern bicycles. The post mount brake mount allows for easy installation of disc brakes, increasing the fork's versatility. The 2021 model year highlights the contemporary technology and advanced materials used in its construction. The Adventure Race Carbon is therefore an excellent choice for those who value quality and performance.
