Thule VeloCompact
CHF486.– was CHF571.50

Thule VeloCompact


Questions about Thule VeloCompact

What would you like to know?

Avatar

0 questions and answers

Avatar

1 week ago

Avatar

1 hour ago

Unfortunately, we cannot provide any binding information on this. According to the manufacturer, however, it is most likely not possible to open the tailgate of the VW Caddy when the Thule VeloCompact is folded down, as the tailgate is very large in comparison. Unfortunately, we do not have a compatibility list, as it also depends on how high or which towbar is installed.
Avatar

1 month ago

Avatar
Galaxus

1 month ago

No, with the Thule VeloCompact (926002), a towbar carrier, you cannot open the tailgate of the VW California T6.1 when the carrier is lowered. The angle of inclination is not large enough on this model, which is why the tailgate is blocked. For models with tailgate opening, please choose another carrier such as the Thule 929 or VeloSpace XT.
Automatically generated from the .
Avatar

6 months ago

Avatar

6 months ago • purchased this product

purchased this product
Helpful answer
What does "wide frame" mean? 6 cm diameter? 8 cm? The Fischer could be suitable if only 2 bikes need to be transported: Fischer bike ProlineEvo 2
Avatar

9 months ago

Avatar

9 months ago • purchased this product

purchased this product
Helpful answer
The buckles are 55cm apart, so I was told that children's bikes with a wheelbase of 75cm or more could be fitted. Unfortunately I don't have such small bikes to try. The smallest I have fitted without any problems had a wheelbase of 90cm.
Avatar

4 years ago

Avatar

4 years ago • purchased this product

purchased this product
Helpful answer
Bicycle carrier should work with any car as it is installed on the trailer hitch. Just make sure you have a 9 or 13 pin electrical connector. What I find great about this bike carrier is the feature that when you switch on the car's alarm indicators and then the electrical contact of the bike carrier, the bike carrier automatically runs through a test programme for all lights. Very practical.
Avatar

5 years ago

Avatar

5 years ago • purchased this product

purchased this product
Helpful answer
Hello, Yes, with bikes it's a bit tight... I have to protect the fork and chain stay if necessary. Also with the 1st bike (to the car) with handlebar widths over 80cm I have to turn it away sometimes. But otherwise it is a great carrier... I don't know of a better one!
Avatar

5 years ago

Avatar

5 years ago • purchased this product

purchased this product
It depends very much on how neatly you position the carrier on the trailer coupling head. If it is too tight, lift it again, place it on the ball head again and pull it up a little at the back.
Avatar

5 years ago

Are 35mm rims compatible with 2.4 tyres?

Avatar

5 years ago • purchased this product

purchased this product
The bicycle wheel is placed in a rail. A fastening band is fixed to the rail on one side and a tensioning device (ratchet) on the other side. The strap is flexible. The maximum height of the band with 2 prongs in the tensioning device is 16 cm (x). If the maximum width is at a height of 7 cm (y), the maximum possible width is 9.5 cm (z). Furthermore, it depends on the length of the bike, so it may be that the wheel fixation is not at the lowest point (It usually is, because better stability is achieved). But the fixation can also be done with a separate clamping set. See pictures here: https://www.mtb-news.de/forum... https://www.emtb-news.de/forum... Size of "Thule VeloCompact 3" mounting loop Height of rim + tyre (x) = height of loop / height from ground (y) at maximum width / effective width (z), of fastening strap. 16 cm / 7 cm / 9.5 cm 16 / 9 / 9 15 / 5 / 10 15 / 6 / 10,5 15 / 10 / 10 14 / 9 / 11,5 14 / 10 / 11
Avatar

5 years ago

Avatar

5 years ago • purchased this product

purchased this product
Yes, should fit mM. My CH car has 13-pin (similar to Velocompact 3). The only thing missing from the Unitec short adapter (also available at Galaxus) is the cover to prevent it from turning out. But maybe they have solved it differently...
Avatar

6 years ago

Does the carrier work for 2.8" wide tyres?

Avatar

6 years ago • purchased this product

purchased this product
The width of the wheel loop is 9.5 cm (10 cm tyre width also possible). Then the loop has a height of 13 cm (tyre + rim).
Avatar

6 years ago

Avatar

6 years ago • purchased this product

purchased this product
Helpful answer
I would say yes, that would fit: - My MTB has 117cm Radstand and fits easily. - Veloträger is 118cm wide (Felgenhalter Ende zu Felgenhalter Ende) but since both are under an angle, the supporting position (Kontaktfläche Felgenhalter - Reifen) for any MTB is far less than the Radstand. - At some point the Schnallen could be the limiting factor since these would be too short. Mine still has a lot of spare though (2.4 Reifen) and therefore I do not see this as an issue for a 120cm radstand MTB.

30 of 43 questions

To Top