Questions about Kibernetik KS40M Party Cooler

I don't know, as the Party Cooler was bought for private use.

I've never counted, but a rough estimate is that I have about 35-40 bottles in there.

The control is located at the bottom, on the outside of the appliance. A small mirror or the mobile phone front camera can help to avoid having to tilt the radiator.

The manufacturer is Kibernetik, but the statement that they have not sold the item is correct. We buy the item from suppliers, some of whom source their goods in the EU. This is an EU product from Kibernetik.

Must be covered with stickers. Fridge comes in white.

It should run out of the bottom by itself, otherwise take out the plug in the middle and see if it is clogged. The water on top of the lid is normal (condensation) and there is probably nothing you can do about it. For me, the thermostat is the problem so that the drinks are actually always almost frozen, even on the minimum setting....

i returned this fridge. the cooling was good but the condensed water runs down the middle and can't evaporate well. ergo, mould forms and it starts to stink like hell. the collection tray with the condensation water cannot be cleaned because the motor is in the way and the fridge has to be turned upside down to dismantle it and then all the appetising smelling condensation/mould water empties out. but as i said, it does cool well. ;-)

The regulator is at the bottom. Put the cooler at a slight angle and you will see a knob there. I have it in the middle, it is still cold enough.

Without content! That goes

It's not like that with me either

1) I need approx. 10 -12 kWh per month for cooling to 4 degrees. This corresponds to approx. 2 CHF for me. 2) No, it's too loud. 3) I think the cooling performance is top-notch.

The best thing to do is to contact our customer service directly at https://helpcenter.digitec.ch/hc/de/requests/new. Your request can then be examined individually.

I have used the unit continuously for about 2 years since July 2015, without any particular problems. After that, I connected it to a timer because it cooled down too tiwf for me at its own interval. I have had no problems with this to date either. My recommendation: Clean 1-2 times a year.

Well, it consumes electricity when it is switched on. For good cooling, max level 5, that's enough

Hello A lock? Well, mine doesn't have one either. Where does it say that?

Yes, they fit in, just put them upright!

I have the cooler in my living room and it is very quiet.

The height incl. castors is 74cm. The castors alone are 5.5cm high.

If you mean the lid at the top, then it should not be removed, as this is crucial for keeping the drinks cool. The plastic lid inside does not need to be removed either. The lid is slightly raised, so the condensation can run off without problems.