TV mounts

Hello, I am looking for a wall mount that allows a 43" TV to be swivelled through 90°. This means that the TV is at a right angle to the wall. Do you have a recommendation? Thank you.

0

Hello everyone, I have a problem with my SpeaKa Professional ceiling mount, and maybe someone can help me. The TV no longer shuts down. I have already loosened the three screws on the back, which caused the TV to come down. Please be very careful when doing this, otherwise the TV with the arm can tip forwards very quickly. The problem: As soon as I reattach the strap, I can raise the TV without any problems and stop it to select a setting. But shutting it down no longer works. After some time in operation, the device starts beeping in an endless loop - 2 short beeps, a short pause, then 2 beeps again. When this happens, the holder can no longer be started up. I have to disconnect it from the power supply and reconnect it to be able to start it up again. However, it is still impossible to shut it down. Does anyone know what the problem could be or how I can fix it? Many thanks in advance for your help. VG Popek

0

Hello everyone I would like to screw the 65S90 to the wall, preferably with a horizontally swivelling wall bracket. As the mounting points on the TV are very low, I'm not sure which bracket to choose. Does anyone here have a product suggestion? Many thanks in advance!

0

Hello Community I am looking for a Vesa 100x100 wall mount for a 32" TV. However, I would like to simply remove the TV from the wall mount and use it in a second location. I can't "drive" the TV into the bracket from above for space reasons, as the ceiling (boat) is directly above. Any ideas? THANKS

0

Hello all, I have a Samsung UE55JU7580/UHD Curved and haven't found the right wall mount yet.... Can anyone recommend one for me? It should be adjustable both horizontally and vertically. LG and have a nice evening.

1

Servus, My mother wants me to screw her TV (65") to a wall. The difficult thing is that the TV is in front of a curved wall, or rather the wall of a spiral staircase. Are there special wall brackets for this, or can I also take one that is mounted "vertically"? Thank you very much for your input

2

Hello. I would like to hang a TV on the wall next to my hot tub during the winter months. Although I'm not sure if the TV will survive (it's covered), I'd like to try it. It would probably be easiest if I could just remove the TV. Is there a wall mount that is suitable for this? I have a Samsung 48" TV. The only wall bracket I have found is the following: https://www.galaxus.ch/de/s1/product/goobay-easymount-wand-37-60-kg-tv-wandhalterung-15711868. For whatever reason, this is supposedly only for 37" TVs (& has a super 2 star rating). I hope someone already knows about this (: Cheers

0

Hello The 55" is currently hanging on the wall. Do the holes of the 55 inch bracket also fit on 75"? Or are there corresponding adapters? I don't want to drill even more holes in the wall. Many thanks and greetings Mani

3

I am looking for a wall or floor stand for a Samsung UE42F5370SS TV. It is a few years old.

2

Hello all Do you know why a maximum screen diagonal is specified for the wall mounts? For example, if I were to take the wall mount from TecTake 65", 120kg for a 75" Samsung TV which weighs around 35kg, and fits the 400x400mm VESA mount, the combo should still fit or am I missing a detail?

1

Hello together I am looking for a TV wall mount for a 55 inch TV which can be rotated from landscape to portrait. It should also have arms for a wall distance of approx. 70 cm. Does anyone know something like this?

0

Hello Community I am looking for a suitable wall mount for the Sony Bravia XR A90J 65' inch. Is there a compatible mount that can support the weight over 22.5kg? Greetings Aleks

1

Hello Community, Somehow I'm not getting any smarter and have no idea how to look for this :-) The problem: I have a plaster wall, which has a built-in mirror cabinet on the other side (bathroom). Now, in order to centre the unit, I would drill directly into the mirror on the opposite side with a conventional TV mount (is not the goal :-P). The bracket would therefore have to be aligned about 20-30 cm to the left and still allow me to centre the set (probably 43 inches). Do you have any ideas or suggestions? Thank you very much for your feedback!

1

I am looking for a wall mount for a 65 inch TV (weighing 25.6 kg). The mount should be able to be rotated at least 90° horizontally without hitting the wall and be adjustable for inclination. Do you know of a good value bracket? Thank you in advance for your help.

0

I have a 6 year old Sony TV (kdl-42w655a) with a Bravia mount. What makes this bracket different from others is that it only has 2 screws in the middle and directly underneath the housing is 10cm thicker. I wanted to buy a horizontally swivelling bracket for my faithful flicker box, but I am a little unsure whether there is a suitable solution at all. Does anyone have any ideas?

6

I am looking for a wall mount that can be folded out to 90°. I have a 43 inch Samsung TV. What are the solutions

0

Hello together Can I leave the TV upright and place it horizontally when I need it? I'm not sure if it will work if you have it vertical...

0

Hello all I am looking for TV mounts as described in the title. I suspect that many are only tiltable by loosening screws/nuts beforehand. What other solutions are there? Do you have any recommendations?

1

I am looking for a wall mount that is cheap but has at least one tilt function for this TV: https://www.digitec.ch/de/s1/product/samsung-ue55ru7170-55-4k-lcd-2019-tv-10470155?supplier=3204073

1

No disrespect intended, but what's up with you Digitech? Why do you have dozens of wall mounts on offer when only a handful are obviously good value AND useful? Throw that crap out, please! Free market economy blah blah and steal the customer's time for it... merci P.S. For all those who are looking for a wall mount to tilt (yes, even M-Electronics has the filter on their website) it would be the Vogel's Wall 3215.

1

I would like to hide my TV (55") sideways behind a cabinet. And if necessary, pull it into view from the side. So I am looking for a kind of rail where I can mount the TV. (I have found various such systems for caravans on the Internet. But these only fit small TV sets). Does anyone know of such a mount? Ideally, this mount should be as flat as possible and, as a bonus, motorised. The extension path should be at least 60 cm.

2

What is the compatible (and best) wall mount for the 85inches Sony Bravia TV?

0

Hello together My previous TV (Samsung 82", 2018 model) had a defect and was credited by the manufacturer due to missing spare parts. Now I have bought a new TV (Samsung 82", 2019 model) and unfortunately had to notice that the Vesa holes no longer have the same position on the back panel (20cm height difference). As the previous TV was placed nicely in the middle of the wall, the new TV is completely offset and looks more than stupid on the wall. Now I am forced to reposition the wall bracket, which doesn't excite me at all, as the next TV will probably have a different Vesa position again and the wall could end up looking like an Emmenthaler. Now the question for you. Have you already had such a problem? If so, how did you solve it? Did you simply re-drill or somehow compensate for the height difference? Mfg

0

I bought my new TV a few days ago. Now I am moving soon and want to buy a wall mount. However, I don't know which wall mounts are of good quality and can hold my 25kg and 165cm long (in the diagonal). How much money does it take to buy a good quality wall mount and do you have any experience. Can you recommend a product and why? Thanks in advance :)

1

Hello together I am looking for a wall mount for my 65 inch Samsung QE65Q85R. I am torn between a No-Gap from Samsung or a mount with a swivel arm. At first, I was practically certain that I'd buy a No-Gap mount, as I think it looks much fancier when the TV is right up against the wall, which is even better now with the One-Connect-Box system. But after seeing some animations illustrating a small distance to the wall (unfortunately no good videos), I'm open again and even more in favour of a wall mount with a swivel arm. The swivel would be a great addition as you could also watch TV from the dining table.... My goal is for it to look simple and classy, which I think is achieved if the distance is as small as possible. I found these two mounts with swivel arm which would be compatible with my TV: - Hama Fullmotion Ultraslim (currently 128.-; item no. 6308118; https://www.digitec.ch/de/s1/product/hama-fullmotion-ultraslim-wand-tv-wandhalterung-6308118 ) - Vogels Base 45 L (currently 154.-; art. no. 5827101; https://www.digitec.ch/de/s1/product/vogels-base-45-l-wand-tv-wandhalterung-5827101?supplier=406802 ) Hama has a minimum distance of 4.1cm according to pictures, on their youtube video it's 2.5cm, but I think that's the video for 55" TVs. Vogels has a minimum distance of 4.6cm. So Hama seems to be "plainer". But I think there will be reasons why Hama is firstly cheaper and secondly ranked 36 out of 783, whereas Hama is "only" ranked 76 out of 783. Now to my question: do you notice a big difference between a no-gap mount and one with 4.1cm and 4.6cm each? And which of these swivel arm mounts would be more to my liking?

5

Hello dear community. I am looking for a suitable and inexpensive wall mount for my monitor. It is an HP Envy 34c - meaning it is a 34 inch WQHD monitor. As far as I know it is compatible with a Vesa mount, but I am not sure. Hope you can give me some advice :)

0

I am looking for a monitor mount for my PC. It has no holes to put screws in and weighs 11kg. It measures 76cm diagonally. I have a mount in mind (Ergotron LX Desk Mount LCD Arm) but need the right adapter because the screen has no holes for screws. Which one would fit?

0

Hello I am looking for a TV wall mount that will allow me to hang the TV on a wall facing the side of the bed and still look straight at the monitor. I am not sure if the length of the products effectively matches the arm of the mount. Of course I want to spend as little money as possible. I hope you can help me. The TV is 40" and has a Vesa 200*200 mount, so the more compatibility with other devices the better. Thank you!

0

Good evening! I'm looking for a wall mount for my 55" TV with a 300x200 vesa base that I can hide my playstation 4 behind.... does anyone have any experience or can recommend a product?

0

Hello together I am looking for a swivel TV wall mount for my Samsung QE75Q70R TV. Unfortunately, the selection is not very impressive... there is only one and it does not swivel.... any idea? https://www.digitec.ch/de...

1