Make your own smart LED arrangement with the same integrated LED that
is used in our NeoPixel strip and pixels. This tiny 5050 (5mm x 5mm)
RGB LED is fairly easy to solder and is the most compact way possible
to integrate multiple bright LEDs to a design. The driver chip is
inside the LED and has ~18mA constant current drve so the color will
be very consistent even if the voltage varies, and no external choke
resistors are required making your design minimal. Power the whole
thing with 5VDC and you're ready to rock.
This is the S revision of the WS2812 LED chips with 6 pins!
The LEDs are 'chainable' by connecting the output of one chip into the
input of another - see the datasheet for diagrams and pinouts. To
allow the entire chip to be integrated into a 6-pin package, there is
a single data line with a very timing-specific protocol. Since the
protocol is very sensitive to timing, it requires a real-time
microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be
used with a Linux-based microcomputer or interpreted microcontroller
such as the netduino or Basic Stamp. The LEDs basically have a WS2811
inside, but fixed at the 800KHz 'high speed' setting.
Comes in a package with 10 individual LEDs.
* Arduino Library 
 https://github.com/adafruit/Adafruit_NeoPixel … more
If you wish to learn more about this product, please visit the manufacturer's website or contact us: email@example.com
Warranty 36 month Bring-in
Limited right of return
Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty
Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.
Information subject to change.
Have you tested this product? Share your opinion with the Galaxus community.Rate product
You're not connected to the Internet. Please check that your connection is enabled to keep browsing the site.