Best selling Work shoes
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Lowa Renegade Work II S3 GTX
This safety shoe meets the performance requirements of safety class S3 and is certified according to BGR 191. Hydrophobic nubuck leather is resistant to wear. Additionally, the textile material Cordura has been used, which is also very tear and abrasion resistant. A Gore-Tex climate membrane prevents water from penetrating the shoe while remaining breathable. Ergonomically shaped steel caps protect against impacts and pressure stresses in the Renegade Work GTX Mid S3. It is equipped with a steel midsole made of corrosion-resistant stainless steel for puncture protection. The two-layer profile sole Lowa ATC 2000 guarantees excellent slip resistance and is antistatic, abrasion-resistant, heat-resistant up to approximately 130 °C, and cold-flexible down to about -20 °C.
2. Uvex Safety Safety low shoe
Uvex 1 safety shoes in protection classes S1 and S2 optimally protect and support the human body in its individual movement patterns. Based on the latest physiological research findings and innovative technologies, the stresses acting on the musculoskeletal system during work are reduced, and the well-being of the safety shoe wearer is enhanced. The ergonomic design of the uvex 1 safety shoes offers the perfect balance between protection and comfort. The design impresses with clear lines and simplicity.
3. Uvex Safety Safety shoe
Modern, ultralight, and flexible safety shoes made of synthetic materials, making them suitable for chromium allergy sufferers. All sole materials are free of silicones, plasticizers, and other substances that interfere with the wetting of the lacquer.
These shoes are suitable for orthopedic adaptations and insoles from uvex medicare. They have venting resistance below 35 Megaohm and feature a 100% metal-free uvex xenova toe cap that is compact, anatomically shaped, non-thermally conductive, and provides good lateral stability.
The ergonomically shaped double density polyurethane outsole offers excellent slip resistance. The puncture-resistant, non-metallic midsole does not restrict the flexibility of the shoe. You can expect excellent wearing comfort due to newly developed, durable, and climate-optimized breathable materials.
The virtually seamless construction uses high-tech materials to eliminate pressure points. The removable antistatic insole is comfortable, provides moisture transport, and offers additional shock absorption around the heel and forefoot. The collar and dust tongue feature soft padding for added comfort.
4. Skechers Work Ulmus
The Skechers Work Ulmus is a high-quality safety shoe specifically designed for use in industrial environments. With a durable upper made of mesh and synthetic leather, this shoe offers both comfort and longevity. The puncture-resistant midsole protects against sharp objects, while the slip-resistant outsole provides stability on various surfaces. The cushioned Air-Cooled Memory Foam insole ensures pleasant cushioning and supports the foot throughout the workday. The carbon toe cap offers additional protection while being lightweight, enhancing comfort. The Work Ulmus meets the safety standards of category S3, making it ideal for demanding work conditions.
- Standard: EN ISO 20345: 2011 Category: S3 SRC ESD
- Carbon toe cap
- Skechers ESD-Air cooled Memory Foam insole
- Slip-resistant, gasoline and oil-resistant traction outsole
- Metal-free puncture resistance
- Energy absorption in the heel area.
5. Lowa Renegade Work II GTX
This safety shoe meets the performance requirements of safety class S3 and is certified according to BGR 191. Hydrophobic nubuck leather is resistant to wear. Additionally, the textile material Cordura has been used, which is also very tear and abrasion-resistant. A GORE-TEX climate membrane prevents water from penetrating the shoe while still being breathable. Ergonomically shaped steel caps protect against impacts and pressure stresses in the RENEGADE WORK GTX Mid S3. It features a steel midsole made of corrosion-resistant stainless steel for puncture protection. The two-layer profile sole LOWA ATC 2000 guarantees excellent slip resistance and is antistatic, abrasion-resistant, and heat-resistant up to approximately 130 °C, as well as cold-flexible down to about -20 °C. Hydrophobic nubuck leather and Cordura textile material with GORE-TEX performance.
6. Uvex Safety Maccrossroad 3.0 BOA
Sole: Macsole rubber with Eva Macabsorb inserts in heel and front, resistant to oils and hydrocarbons, slip resistance according to SRC, contact heat resistance up to 300 °C according to HRO Rubber overcap. Strap: water-repellent synthetic fabric with gussets against penetration of liquids. Upper: oiled full grain leather that protects against liquid penetration, rear and side "Agile Ankle Guard" reinforcements, padded shaft edge. Fit System Boa allows quick and easy closure, closure allows precise and individual adjustment, extremely robust and lightweight laces. Lining: 3D mesh for excellent ventilation quick drying. Toe cap: metal-free. Anti-puncture sole: metal-free. Insole: fabric upper and open cell foam bottom. Standard: EN ISO 20345:2011 S3 CI HI HRO SRC.
7. Haix Trekker Pro 2.0
Upper waterproof leather that is hydrophobic and breathable (5.0 mg/cm²/h), with a thickness of 2.5 – 2.7 mm. Lining made of GORE-TEX® Performance; waterproof and breathable. Highly abrasion-resistant lining with a fleece interlayer for optimum climate comfort in all seasons, meeting the highest demands. Increased chemical protection. The insole is made of moisture-absorbing synthetic/fleece material, dimensionally stable, torsion-resistant, and reduces selective pressure (e.g., from stones). The anatomically shaped insole offers excellent moisture absorption and quick drying, and is replaceable and washable. The HAIX® protective steel toe cap is anatomically shaped to meet the highest safety requirements. The HAIX® protective sole is flexible, lightweight, and penetration-resistant, featuring a metallic sole insert. The rubber outsole has a tried-and-tested street/terrain profile, is abrasion-resistant and non-slip, with a large, sloping tread surface for enhanced grip.
8. Artilux Overshoes
Made of felt, grey with edging, these shoe covers are worn over dirty shoes to protect floor coverings, carpets, valuable floors, and freshly cleaned rooms from dirt. Size example: size 44 fits normal street shoes in size 43 and 44. For safety shoes, order approximately 1 to 2 sizes larger.
9. Uvex Safety Safety boots
The robust uvex 2 safety shoe series in protection class S2/S3 is optimized for medium-heavy applications and is aimed at sectors such as chemicals, transport and logistics, energy, mechanical engineering, and trade. It features a particularly lightweight and flexible, 100% metal-free uvex xenova toe cap of the latest generation, compact design, anatomical shape, good lateral stability, no thermal conductivity, and is non-magnetic. The non-metallic, anti-puncture insole meets the latest standards without impairing the shoe's flexibility. Manufactured with new last technology for exceptional wearing comfort, it offers an optimized wearing sensation thanks to uvex climazone technology. The hydrophobic and breathable upper leather is made of particularly soft cowhide, providing optimum ventilation through Distance Mesh lining material. An individually adjustable, elastic handle with quick lock is included, along with a standard replacement handle (6502 only). The almost seamless shaft construction avoids pressure points, while the removable comfort footbed is antistatic, features a moisture transport system, and includes additional heel and forefoot cushioning. The soft padded collar and padded dust flap enhance comfort. The two-layer sole consists of a particularly light and optimally shock-absorbing midsole and a very slip-resistant outsole, free of substances that interfere with lacquer wetting, such as silicones and plasticizers. An injected polyurethane overcap protects the upper leather over the toe cap for significantly longer service life. It also meets ESD requirements with a bleeder resistor.
10. DC Shoes S3s Stagwork
DC Shoes Safety Half Shoe S3S DC Stagwork DC60501S3S, Size 43
Composite toe cap
Safety shoe made with a combination of leather and PU upper. Foam-padded tongue and collar provide additional comfort and support. The extra-wide reinforced toe cap protects and frees your toes, allowing you to move quickly and effortlessly throughout your workday. Create boldly. Join the DC Work Crew and set new standards by inspiring your work with creativity and pushing boundaries together. Set trends, shape your culture, rebel creatively, and move forward. These shoes connect work teams worldwide and offer the necessary comfort and support to tackle new challenges at work time and again.
Upper material: Leather and polyurethane
Lining: Moisture-wicking nylon fabric
Insole: PU
Special features: 100% metal-free, extra-wide toe protection cap, Pill Pattern profile, ESD
CE Category II
EN ISO 20345:2022 S3S SR ESD.
Product order
See all products