Best products in the Welding machines category
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Güde SG 131 A-SYN
Compact inverter welder with innovative flux-cored technology. IGBT-supported inverter technology for extremely fast switching processes and precise welding current regulation, which simplifies the welding of thinner sheets and significantly reduces welding bead formation. Simple and effective welding with special wire in which the shielding gas is enclosed in pulverised form. With the new, innovative Synergic-controlled wire feed, the wire feed speed adjusts itself to the optimum value. Ideal for occasional, small-scale use in the workshop and on assembly sites, as no gas cylinder is required. For medium material thicknesses of 1.5-8 mm. Infinitely adjustable from 20 -120 amps. Also suitable for welding work outdoors in windy conditions, as the shielding gas cannot be blown away. Ready for immediate use with connected hose package, earth clamp, including brush hammer, welding shield, 0.45kg welding rod 0.9mm, 3 spare nozzles 0.9mm and a spare feed roll 0.9mm.
2. Mytovosn Plastic welding machine
This plastic welding machine, made of a combination of ABS plastic and stainless steel, has 800 welding pins with different specifications and does not require additional hot clips. With a power of 70 W/100 W, it heats up in only 1-3 seconds. Furthermore, the device has an overheating protection. The ergonomically shaped handle ensures comfortable handling. The machine is suitable for repairing and reinforcing plastic parts of cars such as bumpers, dashboards, lamp sockets and plastic rings. The scope of delivery includes a plastic welding machine, 100 flat staples (0.8 mm), 100 flat staples (0.6 mm), 150 outside corner staples (0.6 mm), 150 inside corner staples (0.8 mm), 200 curled clips (0.8 mm), 100 curled clips (0.6 mm), a pair of pliers, a general purpose knife and a carrying bag. The dimensions of the machine are approx. 26 x 16 x 4.5 cm. The plastic welding machine weighs approx. 980 grams. The power cable is 1.5 m long.
3. Stahlwerk Schweißgerät Mini FLUX 120 ST mit ARC | MMA-Funktion mit 120 Ampere
Note: To avoid damaging the appliance, please note the following: The lock on the wire reel is a bayonet lock. To release it, it must first be pressed in against the spring and then turned to the left. After inserting the reel, the lock must be pressed in again and then closed to the right.
Note: The appliance is not intended for use in residential areas where the power supply is provided by a public low-voltage supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.
Technical data
Model: STAHLWERK Mini FLUX 120 ST cored wire welding unit
FLUX output current: 20 - 120 A
Output current ARC / MMA: 20 - 100 A
Duty cycle (40°C): 15 % at 120 A / 100 % at 46 A
Protection class: IP21S
Mains voltage: 1 x 230 V AC
Mains frequency: 50/60 Hz
Maximum mains current (I1max): 17.3 A
Maximum effective mains current (I1eff): 6,7 A
Suitable for cored wires: ø 0.6 - ø 1.0 mm
Weight: 4 kg
Dimensions L x W x H: 300 x 165 x 270 mm
Mains connection: CEE 7/7 Schuko plug
Standards: IEC 60974-1; EN 60974-10 (Class A)
Certified by: SGS Standards Technical Services Co, Ltd.
Scope of delivery
1 x STAHLWERK Mini FLUX 120 ST cored wire welder
1 x FLUX torch hosepack 2 m
1 x earth cable 1.2 m
1 x wire guide roller 0.6 / 0.8/0.9/1.0 mm knurled (pre-assembled)
1 x MIG MAG premium welding wire Flux cored wire E71T-GS ø 0.9 mm 0.45 kg
1 x High-quality wire brush
1 x slag hammer 300 g.
Welding machinesavailable
CHF94.–
Stahlwerk Schweißgerät Mini FLUX 120 ST mit ARC | MMA-Funktion mit 120 Ampere
4. Stahlwerk Fülldraht Schweißgerät FLUX 140 M mit Drahtvorschub
Properties
Flux-cored wire welding (FLUX) - welding without shielding gas. Welding with flux-cored wire is based on a similar process to MIG MAG welding, with the difference that no shielding gas needs to be supplied in this process.
Synergic wire feed - The wire feed speed is controlled fully automatically via the welding current.
IGBT technology - State-of-the-art transistor technology of the latest generation enables maximum performance and duty cycle (ED) at full power! No transformer, no MOSFET, state-of-the-art IGBT!
Technical data
Model: STAHLWERK FLUX 140 M Flux-cored welding machine
Output current: 20-140 A
Protection class: IP21S
Mains voltage: 1 x 230 V AC
Mains frequency: 50/60 Hz
Maximum mains current (I1max): 20.3 A
Maximum effective mains current (I1eff): 7,9 A
Weight: 7.8 kg
Dimensions: 395 x 205 x 345 mm
Mains connection: CEE 7/7 Schuko plug
Standards: IEC 60974-1; EN 60974-10 (Class A)
Certified by: SGS Standards Technical Services Co, Ltd.
Scope of delivery
1 x STAHLWERK FLUX 140 M cored wire welder
1 x FLUX torch hose package 2 metres
1 x 3-piece accessory set (already pre-assembled on the FLUX torch):
1 x gas nozzle
1 x contact tip 0.8 mm
1 x gas nozzle holder
2 x contact tips 0.9 mm
1 x ground cable 2 metres
1 x High-quality wire brush
1 x STAHLWERK slag hammer
1 x wire guide rollers 0.6 & 0.8 mm (0.8 & 1.0 mm pre-assembled)
1 x protective cover.
5. Stahlwerk Schweißgerät DC WIG 200 ST IGBT mit 200 Ampere und MMA E-Hand
Properties
DC TIG welding - direct current (DC). Welding of almost all metals, such as steel, stainless steel, copper, brass and many more. Note: Not suitable for aluminium - an AC/DC device is required for this.
2 in 1 combination device - TIG & MMA welding is possible up to 200 A.
Technical data
Output current (TIG / MMA): 10-200 A
Protection class: IP21S
Mains voltage: 1 x 230 V AC (+- 15%)
Mains frequency: 50/60 Hz
Maximum mains current (I1max) (TIG / MMA): 27.7 A / 39.7 A
Maximum effective mains current (I1eff) (TIG / MMA): 14.5 A / 13.5 A
Weight: 7.6 kg
Dimensions L x W x H (mm): 390 x 170 x 275
Mains connection: CEE 7/7 Schuko plug
Standards: IEC 60974-1; EN 60974-10 (Class A)
Scope of delivery
1 x STAHLWERK DC TIG 200 ST IGBT welding machine
1 x Professional TIG welding torch WP-26F / hose package 3 metres* with flexible torch head and kink protection on the gas connection
1 x TIG TIG accessory set 8 pieces:
3 x gas nozzles sizes: 5, 6, 7
1 x clamping sleeve size 1.6
1 x clamping sleeve housing size 1.6
2 x torch caps - one short and one long
1 x universal tungsten electrode
(*Pre-assembled accessories from the picture of the welding torch are part of the 8-piece set)
1 x earth cable 3 metres
1 x welding cable with electrode holder 3 metres
1 x wire brush
1 x Gas connection hose with quick coupling 5 metres
1 x protective cover.
Welding machinesavailable
CHF218.–
Stahlwerk Schweißgerät DC WIG 200 ST IGBT mit 200 Ampere und MMA E-Hand
6. Stahlwerk MIG MAG 135 welding machine
- MIG/MAG shielded arc welder with MMA E-Hand function. Modern IGBT technology - powerful 135 A with high duty cycle.
- Suitable for flux cored wire, automatic wire feed, adjustable inductance and voltage.
- Many extras: High performance cooling & overheating protection, hot start, anti-stick and much more.
7. Stahlwerk ARC 200 MD
MMA electrode welding / ARC welding - a universal welding process. An electric arc melts the electrode to form the weld seam. No shielding gas is required and can therefore be used flexibly at any location. Can be extended to a DC TIG welding unit with the optionally available WP-17V universal lift TIG torch. IGBT technology - The latest and most modern transistor technology enables maximum power and duty cycle. No transformer, no mosfet, state-of-the-art IGBT. Lightweight & compact design - only 3.2 kg weight and dimensions of 245 x 100 x 160 mm. Innovative IGBT transistors save space and weight compared to the old mosfet technology. No more heavy carrying. Highest efficiency & performance - single-phase alternating current (230V) supplies the device and allows an output power of real 200 amps. Scope of delivery: 1 x The ARC 200 MD IGBT steelwork welder. 1 x earth cable 3 metres. 1 x electrode holder 3 metres. 1 x protective cover. 1 x wire brush.
8. CFH Weld-Fix SF 3100
This compact welding and brazing unit works with oxygen and high performance mixed gas AT 3000 with a working temperature of 1250°C according to professional, craft standard. Whether in the workshop, for sanitary work or model making - with this complete set you have everything you need for welding and brazing at hand. The finely adjustable torch with 3 interchangeable nozzles works with a sharply focused flame for material thicknesses from 0.1 to 2.5 mm. Professional welding and brazing. 3 interchangeable nozzles. Material thickness, 0.1 to 2.5 mm. Compact and easily portable. Soldering possible in all positions. Scope of delivery: Oxygen cylinder 105 bar = 105 L; High-performance mixed gas AT 3000; Welding goggles; 3 exchangeable nozzles; Flame arrester; Hose package with oxygen non-return valve; Assembly key; Compact plastic carrying frame. Gas: Oxygen and high performance mixed gas AT 3000.
9. Stahlwerk Plasma cutter CUT 50 ST
Plasma: conductive metals e.g. standard steel, copper, stainless steel, brass, aluminium, titanium can be cut without problems. Cutting capacity up to 14 mm (depending on material): Mild steel ST37 up to 14 mm / V2A or V4A up to 8 mm, - Aluminium up to 5 mm. CUT contact: smooth-running HF ignition, one stroke is enough. IGBT technology Advantages: powerful, good forward behaviour, high reverse voltage and robustness. Scope of delivery: 1 x The CUT 50 ST steelwork plasma cutter. 1 x Professional plasma hose package AG-60/SG-55, 3 metres. 1 x 3-piece plasma accessory set (this is already pre-assembled on the plasma torch): 1 x plasma nozzle, 1 x plasma electrode, 1 x ceramic cap. 1 x earth cable 3 metres. 1 x water separator with pressure gauge and snap-on quick couplings. 1 x Connecting hose with snap-on quick-release couplings from the device to the water separator, incl. 6-piece connection set. 1 x Air connection hose with Snap-on quick-release coupling 5m. 1 x protective cover. 1 x Teflon tape.
10. Neo 1200W plastic pipe welding machine
Plastic pipe welder 1200 W, for sockets and pipes: PE, PP, PB with O up to 110 mm, power supply 230 V, 50 Hz, weight 6.9 kg, head temperature 260 °C, stand, case, CE.
