Pressing tools
CHF142.99
Wiltec Turning arbor press up to 2T Workshop press Hand press Hand lever press Punching
Best selling Pressing tools
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Wiltec Turning arbor press up to 2T Workshop press Hand press Hand lever press Punching
This robust turning mandrel press, made of solid cast iron, is an indispensable tool that should not be missing in any workshop.
With a pressing force of 2 tons and a four-fold adjustable base plate with a diameter of 17 cm, this manually operated press is versatile and suitable not only for pressing tasks, such as inserting and removing bearings, bushings, and shafts, but can also be used for bending workpieces, for example. To enhance stability, the turning mandrel press, which is compatible with most workbenches, can also be secured by bolting.
2. Wiltec Hydraulic press
This workshop press with a pressure force of 20 tons offers ideal support in crafts, industry, agriculture, landscaping, and many other areas of application. The principle is quite simple: a small force applied to the pressure piston generates an enormous force at the working piston. This makes the manual press versatile and universally applicable. Without much effort, alignment tasks, bending and stamping work, as well as pressing and crushing tasks can be accomplished with the 20-ton press. This press proves to be an ideal tool for repairs, restorations, and much more. The solid frame construction made of steel measures 150 x 61 x 60 cm and weighs 68 kg. The bolted cross members with the support jaws are adjustable to 6 different heights. The height of the press table can be easily adjusted by loosening and tightening screws. The stroke height is 175 mm, and the working width is 425 mm.
3. Wiltec Werkstattpresse
This hydraulic workshop press has a pressure force of 12 tonnes and is suitable for both hobby mechanics and workshop owners. Whether for bending, pressing, stamping or crimping, this press applies enough pressure with minimum effort to help you restore and maintain your vehicles. Tasks such as pressing out bearings, pressing shafts together or bending body parts are child's play. The pressure gauge provides you with information about the applied pressure at all times, helping you to use the optimum working pressure. The robust steel construction with variable working height adjustment offers a working range of 90-1035 mm and a lifting height of 145 mm.
4. Makita DTR180ZJ
A user-friendly reinforcement connector for rebar and underfloor heating systems. One-handed operation allows for positioning of the rebar. The binding force can be adjusted between 1 and 6 Nm depending on the material.
5. Sanpro Power Press SE radial press + 3 - M pressing jaws 15, 22, 28
REMS pressing machine / pipe press / radial press model Power-Press SE
Includes 3 pieces of SANPRO pressing jaws / pressing tongs with contour M (e.g., for composite pipes such as Uponor Unipipe, Wavin, ...) in sizes M 15, M 22, and M 28.
Details of the pressing machine:
- Electric radial press for the production of press connections D 10 - 108 mm.
- For driving press tongs / press chains / press slings.
- Press tong holder with automatic locking mechanism.
- Model with safety electronics, which switches off in the event of overload.
- The device has a very slim design, eliminating the need for a rotating head / handle.
- Electromechanical drive unit with maintenance-free reduction gear and safety slip clutch, proven universal motor 230 V, 50-60 Hz, 450 W, safety tip switch.
- Supplied in a sturdy cardboard box.
Details on the pressing jaws / pressing tongs:
- Compatible with all REMS radial presses (except REMS Mini-Press ACC and Eco-Press) and suitable radial presses from other manufacturers.
- Manufactured from high-strength, forged tempered steel.
- The pressing contours of the SANPRO press jaws are system-specific and correspond to the pressing contours of the respective press fitting systems.
- This ensures perfectly system-compliant, safe pressing.
- Surface blue galvanized and/or black phosphated.
- Very long service life thanks to additional hardening of the pressing profile and roller infeed bevel.
6. Wiltec Profi-Werkstattpresse
This hydraulic press with pressure indicator and 20 tonnes of pressure force is the ideal tool for aligning, bending, stamping, pressing and crimping. This makes the press an ideal support in a wide variety of areas, such as in the trades, in gardening and landscaping, in agriculture or in industry. The principle of the hydraulic press is simple: with little force on the pressure piston, an enormous force is generated on the working piston. The hydraulic press proves to be a welcome aid for repairs, restorations and much more. The pressure generated can be read directly from the pressure gauge. The solid frame construction is made of steel and the bolted cross beams with the support jaws can be adjusted to different heights. The height of the press table can be adjusted. All you need to do is loosen or tighten a few screws.
7. BGS Hydraulic Workshop Press
-20t.
Facilitates the renewal of components such as wheel bearings, transmission shaft bearings, rubber bushings, etc.
Large working range due to a 9-fold adjustable bearing surface.
Pressing pressure can be read off via a large pressure gauge, 0 - 1000 bar (0 - 14500 psi).
Working range: 0 - 1030 mm.
Dimensions (L x W x H): 710 x 550 x 1750 mm.
Stroke: 150 mm.
Weight: 95 kg.
8. Wiltec 30T hydraulic press 500mm workshop press frame press arbour press steel
This workshop press with a pressure capacity of 30 tons offers ideal support in crafts, industry, agriculture, as well as in gardening and landscaping, and many other applications. The principle is quite simple: a small force applied to the pressure piston generates an enormous force at the working piston. This makes the manual press versatile and universally applicable. Without much effort, alignment tasks, bending and stamping work, or even pressing and crushing tasks can be accomplished with the 30-ton press. This press proves to be an ideal tool for repairs, restorations, and much more. The solid frame construction made of steel has a height of 150 cm and weighs approximately 134.5 kg. The base feet of the apparatus are equipped with holes to potentially secure the press to the ground. The bolted cross beams with the support jaws are adjustable in 6 different heights. The height of the press table can be easily adjusted by loosening and tightening screws. Both support jaws are adjustable, and depending on the size and nature of the workpiece, the working width can be set accordingly.
Pressing tools
CHF520.99
Wiltec 30T hydraulic press 500mm workshop press frame press arbour press steel
9. Wiltec XPOtool 20T
This workshop press with 20 tonnes of pressure force offers ideal support in trade, industry, agriculture, gardening and landscaping and many other areas of application. The principle is very simple: a small force on the pressure piston generates an enormous force on the working piston. This makes the manual press versatile and universally applicable.
Alignment work, bending and stamping work or even pressing and crimping work can be carried out with the 20-tonne press without great effort. This press is the ideal tool for repairs, restorations and much more. The solid steel frame construction measures 150 x 61 x 60 cm and weighs 68 kg. The feet of the equipment are provided with holes through which the press can be fixed to the floor if necessary.
The bolted cross beams with the support jaws can be adjusted to 6 different heights. The height of the press table can be easily adjusted by loosening and tightening screws. The lifting height is 175 mm. Working width 425 mm.
10. Klauke K05D
Klauke Crimping Tool K05D
Manufacturer: Klauke
Designation: Crimping Tool 6-50 mm²
Type: K05D
Suitable for: Cable lugs and connectors
Crimping shape: Hexagonal
Cross-section: 6-50 mm²
Length: 390 mm
With locking mechanism (for mechanical tools): no
Operation/actuation: mechanical
Interchangeable inserts: no
With automatic return: no
Klauke Crimping Tool K05D: additional details
Crimping tool for crimp cable lugs and connectors, DIN 46235/DIN 46267 Part 1 6-50 mm². Energy-saving and low-maintenance mechanical drive. Features rotating profile discs. Accurate cross-section assignment through permanent marking on the profile discs. Suitable for DIN crimp cable lugs and connectors.
Product order
See all products