Best Weldman products in the Welding machines category
On this page you'll find a ranking of the best Weldman products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Weldman PÓŁAUTOMAT SPAW.IN.WELDMAN MICRO MIG225
The Weldman Micro MIG 225 Synergy unit is powered by single-phase current and controlled by a microprocessor. It is designed with IGBT inverter technology. For welding with DC coated electrodes as well as for MIG/MAG welding (with shielding gas) and FLUX ( without gas). Shielding gas) and for DC TIG welding (DC) with TIG lift arc ignition. Main functions: MIG/MIG-SYN mode switch (FE only) / setting of wire feed speed for MMA/TIG-LIFT when welding starts to burn. -Return after end of welding. MMA VRD function, inductance adjustment, 2-stage or 4-stage working mode, separation of materials during brazing.
2. Weldman SPAWARKA Inverter WELDMAN ARC
The ARC 225 inverter welder has the following functions: HOT START: Increases the welding current when it hits an arc to facilitate ignition of the electrode. ARC FORCE (Arc Dynamics): Shortens the arc length and increases the welding current, optimises the transfer of the molten electrode droplet to the welded material, prevents the arc from going out when the electrode comes into contact with the material to be welded. ANTI STICK: Limits the welding current, preventing the electrode from sticking to the welded material. The ARC 225 can be welded using the TIG method by connecting a torch with gas valve. The ARC 225 inverter welder is designed for direct current (DC) welding with coated electrodes due to its small and light construction. Can be used for repair work under workshop conditions as well as for outdoor work. Transport is facilitated by a sturdy shoulder strap. Technical data Supply voltage (V) 230 Protection class (IP) 21 Open-circuit voltage (V) 56 Electrode diameter (mm) 2-5 Adjustment range welding current (A) 20-210 Dimensions (cm) 41x12x24 Weight (kg) 5 Including 2 m cable with 200 A electrode holder (DX50) 2 m mains cable with 230 V plug 1.6 m cable with 300 A earth clamp (DX50) Welding mask.
3. Weldman SPAWARKA INWERTOROWA ARC-207 /WALIZKA Z TWORZYWA
Inverter Welder Weldman ARC-207
Digital screen.
Device type: ARC 207.
Hot start (hot start).
ARC Dynamic (ARC Force).
Anti-stick.
Designed for welding with rutile and main electrodes up to 4 mm thick steel (low alloy steel, stainless steel, cast iron, etc.).
Specifications
Supply voltage
230V
Open-circuit voltage
56 V
Welding current adjustment range
20-200 A
Electrode diameter
2-4 mm
Safety class
IP21
Dimensions
38 x 12,5 x 24 cm
Weight
5,5 kg
In the set
2m cable with 200A electrode holder (DX25)
1.6m cable with 300A earth clamp (DX25)
Welding plate
2 m mains cable with 230 V plug
plastic case.
4. Weldman SPAWARKA INWERTOROWA ARC-207 CARTON
ARC 207 for welding coated electrodes with direct current (DC). It is designed for welding various steels (low carbon, low alloy, stainless, etc.) and cast iron with rutile and basic electrodes up to a thickness of 4 mm. The ARC 207 welder has a digital welding current display and a simple lamp system. HOT START ARC FORCE ANTI STICK Technical data: Model: ARC 207 Supply voltage [V]: 230 Open-circuit voltage [V]: 56 Welding current adjustment range [A]: 20-200 Electrode diameter [ mm]: 2-4 Protection class [IP]: 21 Dimensions [cm]: 38×12,5×24 Weight [kg]: 5,5 Welder with: - 2 m cable with 200 A electrode holder (DX25) - 1.6 m cable with 300 A earth connection (DX25) - welding mask - 2 m power cable with 230 V plug.
5. Weldman SPAWARKA INVERTER WELDMAN ARC-203
Inverter welder WELDMAN ARC-203 The ARC 203 inverter welder for DC welding with coated electrodes is suitable for workshops and outdoor repairs due to its small and lightweight design. HOT START: Increases the welding current during arc ignition to facilitate electrode ignition. ARC FORCE: Increasing the welding current shortens the arc length and optimises the transfer of molten electrode droplets to the weld metal, preventing the arc from going out when the electrode touches the weld metal. ANTI STICK: Limits the welding current by preventing the electrode from sticking to the material to be welded. Technical data Voltage 230 V Welding current control range 20-200 Maximum efficiency 200 A Supplied with 2 m cable with 200 A electrode holder (DX50) 1.6 m cable with earth terminal 300 A (DX50) Welding panel 2 m mains cable with 230 V plug.
6. Weldman SPAWARKA INVERTER WELDMAN ARC-220 LCD
7. Weldman SPAWARKA INWERTOROWA ARC-201
ARC 201 is designed for welding with direct current (DC) coated electrodes. It is designed for welding with rutile and basic electrodes up to 4 mm in various types of steel (low carbon, low alloy, stainless, etc.) and cast iron. The ARC 201 welder has a digital welding current display. Technical data: Unit type: ARC 201 Supply voltage [V]: 230 Current open-circuit voltage [V]: 56 Welding current adjustment range [A]: 20-200 Electrode diameter [mm]: 2 -4 Protection class [ IP] :21Dimensions [cm] :24x12x16Weight [kg] :4 The welder is equipped with: - 2m cable with 200A electrode holder (DX25)- 1.6m cable with 300A earth clamp (DX25) - Welding mask - 2m mains cable with 230V plug.
8. Weldman PÓŁAUTOMAT SPAWALNICZY MISTRAL MIG200
Single-phase semi-automatic welder MISTRAL MIG 200, manufactured with IGBT inverter technology, for MIG/MAG welding (shielding gas) or FLUX welding (without shielding gas), electric manual welding with DC coated electrodes and TIG welding with direct current (DC). ) Contact arc ignition (TIG LIFT) Max. 5-kg coil D200. Polish language. MIG/TIG and MMA working method switch. Two digital displays of welding current parameters (ammeter, voltmeter) - 4 m TIG welding torch WP 26 (DX50) - 2 m welding cable with 200 A electrode holder (DX50) - 2 m earthing cable with 300 A clamp (DX50) - two gas connections for 8 mm technitwo gas connections for 8 mm technical hose - 5-pole torch control socket and gas mini quick coupling type 21 - 230 V output socket - welding protection - brush.
9. Weldman SPAWARKA INVERTER WELDMAN ARC-230
10. Weldman Póå'automat spawalniczy Inwert
Weldman inverter semi-automatic welder MIDI MIG 220A 230V IGBT component semi-automatic welder for MIG/MAG and MMA types of carbon steel, alloy steel, stainless steel, acid resistant steel, cast iron and aluminium. The LCD display shows the welding current only during operation. Features thermal, overload and overvoltage protection. Maximum roll weight: 5 kg. Technical data Maximum current: 220 A. Supply voltage 230 V Frequency 50/60 Hz Electrode: 0.6 - 1.0 mm Type: MIG/MAG/MMA Current setting limits: MIG 10-180A / MMA 60-180A Weight: 20 kg Dimensions: 550x240x420 mm. Equipment: Nozzle holder MB 15. Electrode holder 200 A (DX 25). Earth cable with clamp 200 A (DX 25). Welding plate. Brush. Mains cable with 230 V plug.
