Best Helios products in the Ventilation fan category
On this page you'll find a ranking of the best Helios products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Helios M1/100 N / C Minivent DN100 two-stage with overrun
MiniVent M1 small fan features two power stages (90/75 m³/h), codable run-on, and interval operation. The start-up delay is approximately 0, 45, 90, and 120 seconds, while the run-on time can be set to approximately 6, 10, 15, or 21 minutes. The interval operation can be adjusted to approximately 0, 8, 12, or 24 hours. The electronic functions can be set to either the high or low power level. With its excellent design, the MiniVent M1 blends harmoniously into any environment, even in sophisticatedly designed rooms. The closed, shapely facade completely conceals the view into the dirty fan opening. It comes equipped with a tightly closing return air damper as standard. Thanks to ultraSilence technology, the noise level is 25 dB(A) at 75 m³/h volume flow. It is universally applicable for the ventilation of bathrooms, WCs, and other small rooms.
2. Helios DN100 M1/100 F
MiniVent M1 small fan, with 2 power levels (90/75 m³/h) and humidity control. The run-on time can be set to approximately 6, 12, 18, or 24 minutes, and the electronic function can be adjusted to either the high or low power level. With its excellent design, the MiniVent M1 blends harmoniously into any environment, even in stylishly designed spaces. The closed, aesthetically pleasing facade completely prevents visibility into the dirty fan opening. It comes standard with a tightly closing backdraft damper. Thanks to ultraSilence technology, the noise level is at 25 dB(A) at a volume flow of 75 m³/h. Universally applicable for the ventilation of bathrooms, toilets, and other small rooms.
3. Helios Mini fan
Water-resistant plastic housing (IP 45) with grille cover. The upward-facing slats completely prevent visibility into the dirty intake opening and the built-in pre-rotor. Plug-in claw fastening for tool-free installation in pipes with a nominal diameter of 100 mm. Touch protection according to DIN EN 294. With a delay switch, delay time of 2 to 8 minutes.
4. Helios M1/100 Toilet fan Minivent DN100 two-stage without overrun
MiniVent M1 small fan, standard model with 2 power levels (90/75 m³/h). With its excellent design, the MiniVent M1 harmoniously integrates into any environment, including sophisticated spaces. The closed, elegantly shaped facade completely prevents visibility into the dirty fan opening. It comes standard with a tightly closing backdraft damper. Thanks to the new ultraSilence technology, the noise level is just 25 dB(A) at a flow rate of 75 m³/h. It is universally applicable for ventilating bathrooms, toilets, and other small rooms.
5. Helios Fan insert
The Helios fan unit ELS-VEZ 60 is an efficient solution for ventilation in indoor spaces such as bathrooms, toilets, and kitchens. With an air flow rate of 60 m³/h, this fan ensures effective air circulation and contributes to improving indoor air quality. The fan unit is equipped with a run-on switch that allows for a start delay of about one minute and provides a run-on time of five to six minutes, depending on the duration of operation and temperature. This ensures that air continues to circulate even after the fan is turned off, which is particularly beneficial in humid environments. The unit is designed for mains operation and operates at a voltage of 230 V with a frequency of 50 Hz. With a noise level of 40 dB, the fan unit is also quiet in operation, making it ideal for use in living spaces.
- Run-on switch for improved air circulation
- Start delay of approximately 1 minute
- Run-on time of 5 to 6 minutes
- Energy-efficient with a power consumption of 19 watts.
6. Helios Miniature fan HR90 KE
Helios Fans Mini Fan HR 90 KE
Manufacturer: Helios Fans
Description: Mini fan with ball bearings
Type: HR 90 KE
Mains frequency: 50 Hz
Rated voltage: 230 V
Installation type: Surface-mounted
Housing material: Plastic
Color: White
Airflow: 80 m³/h
Protection class (IP): IP45
Nominal diameter: 100 mm
Configuration: Standard
Design: Axial
Direction: Supply and exhaust ventilation
Additional details:
Small fan with ball bearings, splash-proof plastic housing (IP 45) with grille cover. The upward-facing slats completely prevent visibility into the intake opening and the built-in pre-rotor. Snap-fit mounting for tool-free installation in ducts with a nominal diameter of 100 mm. Touch protection according to DIN EN 294. Impeller with 5 profiled blades made of plastic, high efficiency. AC split-pole motor with thermal overload protection for continuous operation with maintenance-free, permanently lubricated ball bearings, non-reversible.
7. Helios Minivent DN100
MiniVent M1 small fan, standard model with 2 performance levels (90/75 m³/h) With its excellent design, MiniVent M 1 blends in harmoniously anywhere - even in rooms with a sophisticated design. The closed, elegant façade completely prevents the dirty fan opening from being seen. Fitted with a tightly closing return air shut-off damper as standard. Thanks to the new ultraSilence technology, the noise level is 25 dB(A) at a volume flow of 75 m³/h. Universally applicable for the ventilation of bathrooms, WCs and other small rooms.
8. Helios MiniVent M1 M1/120
MiniVent M1/120 small fan, standard model with 2 power levels (170/150 m³/h). With its excellent design, the MiniVent M1 integrates harmoniously into any environment, including stylishly designed spaces. The closed, aesthetically pleasing facade completely prevents visibility into the dirty fan opening. It comes standard with a tightly sealing backdraft damper. Thanks to the new ultraSilence technology, the noise level is just 32 dB(A) at a volume flow of 150 m³/h. It is universally applicable for ventilation in bathrooms, toilets, and other small rooms.
9. Helios MiniVent M1/100 small fan
MiniVent M1 small fan features two performance levels (90/75 m³/h) with coded run-on and interval operation. The start-up delay can be set to approximately 0, 45, 90, or 120 seconds, while the run-on time can be adjusted to about 6, 10, 15, or 21 minutes. Interval operation settings include approximately 0, 8, 12, or 24 hours. The electronic functions can be configured for either high or low power levels. With its excellent design, the MiniVent M1 blends harmoniously into any environment, even in sophisticated rooms. The closed, elegant façade completely conceals the fan opening. It comes standard with a tightly closing return air shut-off damper. Thanks to the new ultraSilence technology, the noise level is just 25 dB(A) at a volume flow of 75 m³/h. It is universally applicable for the ventilation of bathrooms, WCs, and other small rooms.
10. Helios MiniVent M1/120 F
Helios MiniVent M1/120 is a small fan designed for use in bathrooms, showers, WCs, and smaller rooms. It can be installed in any position, including duct, pipe, ceiling, and wall installations. The fan features a closed, shapely facade measuring 176x176mm, which conceals the dirty fan opening. It offers two speed levels with a power consumption of 13/10W and includes a ball bearing for continuous load. The fan has an IP45 rating, an airflow rate of 170/150 cbm/h, and a tightly closing return air damper. The insertion depth is 70mm, and the connection diameter is 120mm. It also comes with built-in humidity progression control and an overrun switch.
