Rustproofing
Quantity discount
CHF11.20 per piece for 2 units CHF56.–/1l
Hammerite Rust Remover
200 ml, Transparent
Best selling Rustproofing from Hammerite
On this page you'll find a ranking of the best Hammerite products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Hammerite Rust Remover
Dissolves rust and creates shiny metal surfaces. Does not affect painted surfaces. Drip-free formula for removing rust from ferrous metals. Remove loose rust with a wire brush.
2. Hammerite Metal protective lacquer hammer blow
Rust protection coating for all uncoated, rusted, or previously coated ferrous and non-ferrous metals after appropriate pre-treatment. Suitable for items such as garden fences, garden furniture, stair and balcony railings, window grills, lamps, bicycles, trellises, and more.
Hammerite paints are generally not suitable for painting vehicles, heated surfaces (such as grill pipes, oven pipes, brake calipers, engines, exhaust systems), surfaces that are subject to heavy mechanical stress (such as floors, lift platforms, undersides of cars), powder-coated objects, or components with permanent underwater contact (including pool ladders, boat installations, dishwasher baskets, aquariums).
Preparation:
Untreated ferrous metals: Sand very smooth surfaces, remove sanding dust, and carefully clean the surface with Hammerite Metal Cleaner.
Rusty ferrous metals: Remove loose particles with a wire brush and clean the surface with Hammerite Metal Cleaner.
Cast iron: Remove loose particles, sand, and clean with Hammerite Metal Cleaner. Apply a layer of Hammerite Rust Blocker as a bonding agent.
Tip: The hammer effect develops best when the paint is applied quickly and not too thinly, allowing time for the effect to develop. Repeated touch-ups or spreading of the paint may lead to a reduced hammer effect. Hammered paints can only be overcoated with hammered paints; using other systems may result in adhesion or surface defects.
3. Hammerite Rust remover immersion bath
Small parts such as hinges, screws, nuts, chains, and tools can also be affected by rust and quickly become non-functional. The Hammerite Rust Remover Dip Concentrate provides a quick solution.
Rustproofing
Quantity discount
CHF14.– per piece for 2 units CHF28.–/1l
Hammerite Rust remover immersion bath
500 ml, Transparent
4. Hammerite Zinc spray
High-quality corrosion protection for iron and steel. The cold galvanizing consists of 99.5% pure zinc powder in pigment form. Long-lasting rust protection with quick drying and good coverage. Extreme heat resistance up to 400 degrees. Suitable for indoor and outdoor use.
5. Hammerite Metal protective lacquer
Rust protection paint for all uncoated, rusty, or previously painted ferrous and non-ferrous metals after appropriate pretreatment, such as garden fences, garden furniture, stair and balcony railings, window grilles, lamps, bicycles, trellises, and windows. Colored paints are also suitable for radiators. Hammerite paints are generally not suitable for painting motor vehicles, heated surfaces (such as grills, oven pipes, brake calipers, engines, exhaust systems), surfaces with high mechanical stress (such as floors, lifts, vehicle undersides), powder-coated objects, or components in permanent underwater contact (such as pool ladders, in boat areas, dishwasher racks, aquariums).
6. Hammerite Metal protective lacquer high gloss
Rust protection paint for all uncoated, rusted, or old coatings of ferrous and non-ferrous metals after appropriate pre-treatment. Suitable for garden fences, garden furniture, stair and balcony railings, window grilles, lamps, bicycles, trellises, and windows. The paint is also suitable for radiators.
Hammerite paints are generally not suitable for painting vehicles, heated surfaces (such as grills, flue pipes, brake calipers, engines, exhaust systems), surfaces with high mechanical stress (such as floors, lifts, vehicle undercarriages), powder-coated objects, or components with permanent underwater contact (such as pool ladders, boat fittings, dishwasher racks, aquariums).
The colors white, blue, brown, dark green, light gray, red, and black can be mixed together. The colors gold and silver are not mixable.
7. Hammerite Radiator paint
For quick painting of your radiators.
Coverage: 400 ml is sufficient for approximately 0.5 m² with 2 to 3 spray applications.
Drying time: After about 30 minutes, it is dust dry and can be oversprayed (depending on temperature).
Product advantages and features: Heat resistant, yellowing stable.
Application area: Final coating for metal surfaces that heat up, such as radiators and water pipes. Not suitable for objects that become extremely hot, such as oven doors and grills.
Preparation: Minimize the temperature of the object to be painted - turn off the radiator.
Bare iron metals: Sand very smooth surfaces and remove sanding dust. Clean the surface carefully with Hammerite Metal Cleaner.
Rusty iron metals: Remove loose particles with a wire brush and clean the surface with Hammerite Metal Cleaner.
Old coatings: Remove loose paint and possibly rust particles with a wire brush and sand the surface. Remove sanding dust and clean the surface thoroughly with a degreaser and cleaner.
Galvanized iron: Clean the surface with an ammoniacal detergent wash. Then prime with Hammerite Special Primer.
Application: Store the spray can at room temperature for at least 2 hours before use. Shake the spray can vigorously for 3 minutes just before use. Spray 2 to 3 even layers from a distance of about 15 to 20 cm. Allow each layer to dry for 30 minutes (depending on temperature). Only heat the radiator again after the paint has fully dried (approximately 12 hours).
Caution: For old coatings, perform a test application. If a reaction (wrinkling) occurs after 15 minutes, remove the old coating.
Tip: After each spray application, turn the can upside down and briefly press the spray head to avoid clogging.
Directly on rust, heat resistant, good scratch resistance, color and gloss stable, long-term rust protection.
Rustproofing
Quantity discount
CHF13.70 per piece for 2 units CHF27.40/1l
Hammerite Radiator paint
500 ml, White
8. Hammerite Metal protective lacquer ULTIMA matt
Discover the new premium protective paint from Hammereite, a protective coating for all metals!
- Premium 3 in 1
- Directly on rust
- RAL color shades
- Quick drying
- Easy application
- No primer needed
- Fast drying
- Colour Lock Technology.
Rustproofing
Quantity discount
CHF12.20 per piece for 2 units CHF48.80/1l
Hammerite Metal protective lacquer ULTIMA matt
9. Hammerite Metal protective lacquer HG white
High-gloss spray can of 400 ml
Direct-to-rust metal protective paint. Hammerite Direct-to-Rust Metal Protective Paint serves as a primer, undercoat, and topcoat all in one. DUALTECH provides double protection: water beads off and rust is stopped - the metal remains resilient for longer.
Pre-treatment: Sand smooth surfaces, remove loose rust and peeling old paint with a wire brush. Clean dirt, dust, and grease residues with diluted cleaning agent. Rinse with clear water and allow to dry thoroughly. Apply Hammerite Direct-to-Rust Metal Protective Paint to a small, already painted area and let it dry for 1 hour. If there is no reaction, apply Hammerite Direct-to-Rust Metal Protective Paint to the entire surface. If a reaction occurs, remove all old paint before applying Hammerite Direct-to-Rust Metal Protective Paint. For bare zinc, aluminum, and galvanized surfaces, treat the respective surfaces with Hammerite Special Adhesion Primer before applying Hammerite Direct-to-Rust Metal Protective Paint.
Application: Brush application method. Ideal processing temperature is between 11°C and 25°C. Stir lightly before use. Apply undiluted. On pre-painted metal surfaces in good condition, one coat is sufficient. On bare, rusty metal, two coats are required. Ensure that all corners and edges are well covered. Do not apply too thickly to avoid runs.
Contains: Alkyd resin, solvents, fillers, pigments, additives. Dust dry after approximately 1 to 2 hours. Repaintable after 4 hours. Coverage: 1 liter is sufficient for approximately.
10. Hammerite Hammer finish effect lacquer silver grey 2.5 l
Like all Hammerite metal protective paints, the Hammerite Hammered Metal Protective Paint offers rust protection, primer, and paint in one. It is suitable for all bare, rusted, or previously painted iron and non-ferrous metals (after prior treatment).
Once dry, the paint has a robust and solid appearance, as if the metal surface had been worked with hammer blows.
Rustproofing
CHF40.70 CHF16.28/1l
Hammerite Hammer finish effect lacquer silver grey 2.5 l
2500 ml, Silver grey
Product order
See all products