Hammerite Radiator paint

For quick painting of your radiators.

Coverage: 400 ml is sufficient for approximately 0.5 m² with 2 - 3 spray applications.

Drying time: After about 30 minutes, it is dust dry and can be oversprayed (depending on temperature).

Product advantages & features: Heat resistant, yellowing stable.

Application area: Final coating for metal surfaces that heat up, such as radiators and water pipes. Not suitable for objects that become extremely hot, such as oven doors and grills.

Preparation: Minimize the temperature of the object to be painted - turn off the radiator.

Bare iron metals: Sand very smooth surfaces and remove sanding dust. Clean the surface carefully with Hammerite Metal Cleaner.

Rusty iron metals: Remove loose particles with a wire brush and clean the surface with Hammerite Metal Cleaner.

Old coatings: Remove loose paint and possibly rust particles with a wire brush and sand the surface. Remove sanding dust and clean the surface thoroughly with, for example, Molto Degreaser and Cleaner.

Galvanized iron: Clean the surface with an ammoniacal detergent wash. Then prime with Hammerite Special Primer.

Application: Store the spray can at room temperature for at least 2 hours before use. Shake the spray can vigorously for 3 minutes just before use. Spray 2 - 3 even layers from a distance of about 15 - 20 cm. Allow each layer to dry for 30 minutes (depending on temperature). Only heat the radiator again after the paint has fully dried (approximately 12 hours).

Caution: For old coatings, perform a test application. If a reaction (wrinkling) occurs after 15 minutes, remove the old coating.

Tip: After each spray application, turn the can upside down and briefly press the spray head to avoid clogging.

Directly on rust, heat resistant, good scratch resistance, color and gloss stable, long-term rust protection.