Autarking Batterie Kabel Set
Solar cable
This page always stays fresh and updates automatically.
The battery cable set from Autarking offers a reliable solution for connecting DC high-current consumers such as inverters, inverters and chargers. With a cable cross-section of 25mm² and a length of 0.3 metres, this set is ideal for applications that require high currents. The pre-assembled cables are equipped with M8 cable lugs for easy installation. These cable lugs are fitted with shrink tubing to ensure a secure connection. The flexible, fine-wire design ensures high flexibility and easy handling, while the material used offers high temperature resistance from -40°C to +105°C. The cables are also UV-resistant. The cables are also UV-resistant and comply with the relevant safety standards, making them a durable choice for various power generation applications.
Autarking Batterie Kabel Set
Solar cable
The Anderson 30A to Anderson 30A cable, measuring 4.5 meters in length, is a specialized accessory for solar energy applications. It is designed to provide a reliable connection between various all-in-one boxes or additional batteries. With a height of 20 centimeters and a width of 4 centimeters, this cable offers a compact and convenient solution for your energy needs. Weighing 260 grams, it is lightweight and easy to transport. This cable is ideal for anyone needing an efficient and safe connection in their solar energy systems. It is an essential accessory for utilizing solar energy, suitable for both private and professional use.
Autarking Anderson
Solar cable
Battery cable for high current applications - flexible - 35 mm - red
Flexible, finely stranded DC cable for high current applications such as battery, inverter, or charger wiring. The smaller diameters are perfect for solar charge controllers and charge boosters.
Its flexibility is similar to SGF cable, although the insulation material differs.
Please check our selection of crimp terminals in various sizes under accessories.
Specifications:
Cable cross-section: 35 mm² battery cable
Standard: GB/T 5023.5-2008
Conductor structure:
Copper wires (pieces): 707 pieces
Copper wire outer diameter: 0.25 ± 0.002 mm
Conductor type: OFC (Oxygen-Free Copper)
Conductor resistance at 20 °C (MΩ/km): ≤ 0.0038
Insulation:
Insulation material: Rubber and plastic 105 °C
Nominal voltage: 450/750 V
Insulation outer diameter: 11.8 ± 0.1 mm
Average diameter: 2 mm
Minimum thickness: ≥ 1.6 mm
Flame retardant standard: FT-1
Anti-UV: Yes
Operating temperature range: -40 °C to +105 °C
Color: red
Appearance: No impurities, no scratches, smooth, round
Environmental testing: ROHS (no Pb, Cd, Hg, Cr+6, PBBs, PBDEs)
Voltage testing of the finished product: Soak in water for 1 hour at room temperature, apply 1.5 kV voltage for 5 minutes, no breakdown
Dielectric test: 6 kV
Burn test: -.
Autarking Battery / starter cable Highly flexible - 35mm2 red -25m
Solar panel bracket Z-profile. The Z-profile solar panel bracket is ideal for attaching solar panels to walls or other flat surfaces or structures that can be drilled into. The Z-profile is easy to mount on the solar panel and can then simply be screwed into place. The Z-profiles are made of anodised aluminium and have 4 mounting holes as well as a slotted hole on the solar panel side. For large solar panels, use more than 2 Z-profiles on each side if necessary.
Autarking Solar panel holder
Autarking DC Connection Socket Black - 5m
The simple connection socket for the DC connection in outdoor areas. Usable as a solar input for mobile outdoor panels or as an output for DC consumers in outdoor settings. Comes with a weather protection cap and a 5 m connection cable of 6 mm² (10 AWG).
Please note the adapter cable for feeding solar power with MC4 connectors.
Roof bushing, 2-way. The cable glands are made of white UV and weather-resistant plastic and are therefore suitable for outdoor use. This cable entry is designed for installation with mastic. It has a slight groove for the putty. 2x PG 7 cable glands are suitable for cables from 3-12 mm.
DC7909 Extension Cable 4.5 m. With this cable, you can extend connection cables with an 8 mm solar port. It can be used to connect the panels to each other or to connect the panels to the power pack. Extension cable for 60 W or 100 W solar modules such as Jackery or GoalZero panels to Boulder solar panels, Yeti, and Sherpa power packs.
Battery cable for high-current applications – flexible – 70 mm – red. Flexible, fine-stranded DC cable for high-current applications such as battery, inverter or charger wiring. The smaller diameters are ideal for solar charge controllers and charge boosters. Its flexibility is similar to that of the SGF cable, although the insulation material differs. Please note the range of crimp terminals in various sizes listed under ‘Accessories’. Cable cross-section: 70 mm² battery cable. Standard: GB/T 5023.5-2008. Conductor structure: Copper wires: 1406 strands. Copper wire outer diameter: 0.25 ± 0.002 mm. Conductor type: OFC (oxygen-free copper). Conductor resistance at 20 °C (MΩ/km): ≤0.0032. Insulation: Insulation material: rubber and plastic, 105 °C. Rated voltage: 450/750 V. Insulation outer diameter: 17.5 ± 0.1 mm. Average diameter: 3.3 mm. Minimum thickness: ≥2.8 mm. Flame retardancy standard: FT-1. UV resistance: Yes. Operating temperature range: -40 °C to +105 °C. Colour: red. Appearance: No impurities, no scratches, smooth, round. Environmental testing: ROHS (no Pb, Cd, Hg, Cr+6, PBBs, PBDEs). Dielectric strength test on the finished product: soak in water at room temperature for 1 hour, apply a voltage of 1.5 kV for 5 minutes; no breakdown. Spark test: 6 kV.
Battery cable for high current applications - flexible - 35mm - black
Flexible, finely stranded DC cable for high current applications such as battery, inverter, or charger wiring. The smaller diameters are perfect for solar charge controllers and charge boosters.
Its flexibility is similar to SGF cable, although the insulation material differs.
Please check our selection of crimp terminals in various sizes under accessories.
Specifications:
Cable cross-section: 35mm² battery cable
Standard: GB/T 5023.5-2008
Conductor structure: Copper wires (pieces): 707 pieces
Copper wire outer diameter: 0.25±0.002mm
Conductor type: OFC (Oxygen-Free Copper)
Conductor resistance at 20°C (MΩ/km): ≤0.0038
Insulation:
Insulation material: Rubber and plastic 105℃
Rated voltage: 450/750V
Insulation outer diameter: 11.8±0.1mm
Average diameter: 2mm
Minimum thickness: ≥1.6mm
Flame retardant standard: FT-1
Anti-UV: Yes
Operating temperature range: -40°C to +105°C
Color: black
Appearance: No impurities, no scratches, smooth, round
Environmental testing: ROHS (no Pb, Cd, Hg, Cr+6, PBBs, PBDEs)
Voltage testing of the finished product: Soak in water at room temperature for 1 hour, apply 1.5kV voltage for 5 minutes, no breakdown
Dielectric test: 6kV
Burn test: -.
Autarking Battery / starter cable Highly flexible - 35mm2 black -25m
The Autarking extension cable is a high-quality accessory for solar energy applications, providing a reliable connection between solar panels and other components. With a length of 20 meters, it offers ample flexibility for the installation and arrangement of solar systems. The cable is equipped with MC4 connectors, known for their ease of use and secure connection. The cable thickness of 6 mm² ensures efficient power transmission and minimizes power loss. The design of the cable is tailored to the requirements of solar technology, making it an ideal choice for anyone looking to expand or optimize their solar energy systems. With a height and width of 6 millimeters each, the cable is compact and easy to install. This extension cable is an essential element for the installation and operation of solar systems, helping to maximize the efficiency and performance of your solar energy projects.